Plane To Assemble DWG Plan for AutoCAD

Plane To Assemble DWG Plan for AutoCAD

Plane with instructions and pieces to assemble a plane

Drawing labels, details, and other text information extracted from the CAD file:

sq., gusset typ., cover top of fuse. with, bond paper from nose, to canopy, cover fuse. sides with bond paper, make tailwheel from a pin, fuselage side frames, shown hatched, make from, scrap, balsa block, wing, stab, rudder, glue, here, with scrap balsa, laminated from, fuselage, stations, tube for rear, motor peg, grain direction, for sheet patrs, wing rib, wing tips, gussets, former, doubeler, brace, wing saddle, nose block, t.deck stringer, wheel pant, stab t.e., fs-, dihedral, make, landing gear, music wire, real aircraft has corrigated aluminum sheet, on the elevator and rudder, use peck-polymers, thrust bearing, typ. fuselage station, sand to shape after, joining side frames, stringers, optional canopy bow laminated like stab outline, qan mat., make removable, prop, all material balsa unless noted

Raw text data extracted from CAD file:

FS-9 FS-1 FS-2 FS-3 FS-4 FS-5 FS-6 FS-7 FS-8 FS-9 F-9 F-7 F-6 F-2 F-8 F-8A F-5 F-5A F-10 F-3 W-4 W-3 W-2 W-1 W-1 W-1 W-1 W-1 1/16" SQ. GUSSET TYP. 1/16" X 1/4" LEADING EDGE 1/16"SQ. 1/16"SQ. F-1 F-2 F-3 F-5/5A F-6 F-7 F-8/8A F-9 F-10 F-11 1/16" SHEET DORSAL 1/32"SHEET 1/16"SQ. TYP. COVER TOP OF FUSE. WITH BOND PAPER FROM NOSE TO CANOPY COVER FUSE. SIDES WITH BOND PAPER FROM NOSE TO FS-5 MAKE TAILWHEEL FROM A PIN AND 1/16" SHEET BALSA 1/16" SQ. TYP. FUSELAGE SIDE FRAMES SHOWN HATCHED MAKE FROM SCRAP 1/32" X 1/16" STRINGERS 5 EACH SIDE BALSA BLOCK WING STAB RUDDER 1/16" SQ. SIDE STRINGER 1/16" SQ. 1/16" SQ. GLUE F-5A HERE GLUE F-8A HERE RUDDER BOTTOM 1/16" SHEET FILL BETWEEN BOTTOM OF RUDDER AND F-8 WITH SCRAP BALSA BALLANCE MODEL 1" BACK FROM LEADING EDGE USE 5 DOWN THRUST, 2 RIGHT THRUST LAMINATED FROM 1/16" X 1/32" 2 PCS. VACUUM FORM CANOPY FROM .015 BUTYRATE FUSELAGE STATIONS 1/16" DIA. ALUM. TUBE FOR REAR MOTOR PEG GRAIN DIRECTION FOR SHEET PATRS F-1 F-1A W-1 WING RIB 9 1/32" SHEET W-2 WING RIB 2 1/32" SHEET W-3 WING RIB 2 1/23" SHEET W-4 WING RIB 2 1/32" SHEET WING TIPS 2 3/8" SQ. BLOCK GUSSETS 14 1/16" SHEET F-1 FORMER 1 1/16" SHEET F-1A DOUBELER 1 1/16" SHEET F-2 FORMER 1 1/32" SHEET F-3 FORMER 1 1/32" SHEET F-5 1 1/32" SHEET F-5A 1 1/32" SHEET F-6 FORMER 1 1/32" SHEET F-7 FORMER FORMER DOUBELER F-8 FORMER 1 1/32" SHEET 1 1/32" SHEET F-8A DOUBELER 1 1/32" SHEET F-9 BRACE 2 1/16" SHEET F-10 WING SADDLE 4 1/16" SHEET F-11 L/G BRACE 1 1/16" SHEET NOSE BLOCK 1 1/4" SHEET T.DECK STRINGER 10 1/16"X1/32" STICK 4 1/16" SHEET 2 1/4" SHEET WP-1 WHEEL PANT WP-2 WHEEL PANT STAB T.E. 2 1/16"X1/32" STICK WP-2 WP-1 FS-5 FS-6 FS-7 FS- 8 FS-4 FS-2 FS-3 DIHEDRAL .6" EACH SIDE NOSE BLOCK GLUE F-1A HERE MAKE LANDING GEAR FROM .030 MUSIC WIRE 3/4" WHEELS W-1 W-2 W-3 W-4 WP-1 WP-2 REAL AIRCRAFT HAS CORRIGATED ALUMINUM SHEET ON THE ELEVATOR AND RUDDER USE PECK-POLYMERS THRUST BEARING TYP. FUSELAGE STATION 1/16" SQ. ADD 1/16" SQ. AND SAND TO SHAPE AFTER JOINING SIDE FRAMES FORMER 1/16"X1/32" STRINGERS 1/16" SQ. F-10 OPTIONAL CANOPY BOW LAMINATED LIKE STAB OUTLINE P/N NAME QAN MAT. GLUE GEAR TO F-11 MAKE REMOVABLE 4.5" PLASTIC PROP ALL MATERIAL BALSA UNLESS NOTED A GOOD 3-VIEW OF THIS AIRCRAFT IS AVAIL. FROM: SIG MFG., MONTEZUMA, IA, 50171 POWER WITH A 12" LOOP OF 1/8" RUBBER

Language	English
Drawing Type	Plan
Category	Vehicles
Additional Screenshots
File Type	dwg
Materials	Aluminum, Plastic, Other
Measurement Units	Metric
Footprint Area
Building Features	Deck / Patio, Elevator
Tags	aircraft, airplane, autocad, DWG, instructions, pieces, plan, plane, Transportation