Single Phase Transformer Registration Mt Type 3 On Sidewalk DWG Detail for AutoCAD
Single phase transformre registration MT Tipe 3 on sidewalk – details – specifications
Drawing labels, details, and other text information extracted from the CAD file (Translated from Spanish):
world class, of underground systems, with mt type registration on bench, base for single phase transformer, rule, tolerance, construction specifications dimensions in centimeters. the reinforcing steel will be welded mesh f’y kpa all concrete f’c ka t.m.a. all the concrete will be elaborated with integral waterproofing in accordance with the recommendations of the product. all the concrete would vibrate to achieve adequate compaction. the coatings shall be at least cm. the concrete will have an apparent finish in the common interior in the exterior, not allowing the use of natural terrain slopes as exterior structure will only be allowed on ground with type III material prior to wetting. all edges are chamfered mm. cast concrete template poor f’c cm. of thickness in case of being cast in place. the fillers will adhere to the present specification with degree of compaction of the proctor for curb for all the layers not greater of cm of thickness for stream will be of compaction only the last two layers will be of cm of thickness the lower layers will be cm of thickness of compaction proctor. the copper wire of the ground system must be cross-section of all interconnections of the ground systems must be by self-welding type. for groundwater levels, the ground rods must be left outside by inserting the copper wire through the polyduct sleeve sealing the tank. When the groundwater level is low, the ground rod is installed in the tank. The pipeline is not left in the wall of the log. the quality of the materials will be checked by an authorized laboratory where the assembly will be carried out on site. the records must be identified with the abbreviations type of date of month first year two serial number of the marks must be under relief on any of the inner faces of the register without interfering with the perforation of the ducts with letters of cm of minimum height. for marine environment salty soils should be used cement type according to the norm nom in case the records are must be inspected by the lapem during its construction to have its corresponding proof notice. in all the terminals of the pipelines the sharp edges must be eliminated by means of the one in the case that the register is the diameter of the number of holes of the pipes must be in function of the needs of the project respecting the type of steel reinforcement of thickness of walls of the requested concrete strength. for the prefabricated registers the floor instead of coming from factory constructed it is possible that in the place destined to leave the hole with joints glued so that it is cuele in with a mixture of the concrete of the requested resistance joints additives wetting the edge where they are locate the o-ring
Raw text data extracted from CAD file:
| Language | Spanish |
| Drawing Type | Detail |
| Category | Mechanical, Electrical & Plumbing (MEP) |
| Additional Screenshots |
 |
| File Type | dwg |
| Materials | Concrete, Steel |
| Measurement Units | |
| Footprint Area | |
| Building Features | Car Parking Lot |
| Tags | autocad, DETAIL, details, DWG, éclairage électrique, electric lighting, electricity, elektrische beleuchtung, elektrizität, iluminação elétrica, lichtplanung, lighting project, mt, phase, projet d'éclairage, projeto de ilumina, registration, sidewalk, single, specifications, tipe, transformer, type |