Detail Of Block Wall DWG Detail for AutoCAD
Detail of wqall anchored to flagstone steel – Bores and hilti adhesive in the inferior part ,and sheet badges in the superior part
Drawing labels, details, and other text information extracted from the CAD file (Translated from Spanish):
the steel, var., will present a first course of block, using only pieces and means, supervision before continuing with the following courses., notes of specifications, execution, in the execution of the walls built with, the cement blocks should be considered :, the mortar that is used in the placement of, the blocks will be provided in volume, of, according to the following indications:, resistance to compression similar to, the minimum specified for each, of them, will be of cement mortar , the cement blocks should not be moistened, during their placement, in order to diminish the effects of contraction and expansion. If the mortar is hand-made, the cement and the sand should be mixed dry in a clean trough. , until a uniform color is achieved, then adding water in the amount, necessary., The courses should be with horizontal skimmer, centered on the pieces of the lower course to achieve the coincidence of the hollows that allow the casting of drowned castles, regardless of what is indicated in the preceding paragraph, a metal reinforcement must be provided, placed every two courses of blocks, with the purpose of absorbing the efforts caused by contractions and expansions of the cement blocks, tolerances, should not have collapses, nor deviations in their, stop marking the cuatrapeadas verticals and, hollow cement block walls, reinforced concrete castle drowned in block wall, support for fixation of , wall based on screed, type concrete spike, false plafon of drywall, reinforced concrete chain, block hollow concrete, finished floor, wall, intermediate, the dividing walls of block, which for reasons of privacy require more high that the ceiling, should, ensure its stability by means of metal sills, the chain of the wall finish, this will counteract the thrusts of lateral, accidental forces that could be caused by earthquake or by, incidental impacts and equally freeing the slab from, stiffeners elements alien to the original design., the fixation of the metal sills may be made, taquete., variable, board, content :, key :, general notes :, general symbology: , detail, block wall, dimensions: meters, scale: variable, graphic scale :, – all dimensions are to vain, unfinished unless indicated in details., – the indicated parking levels are on the asphalt folder., – all the finishes will be subject to the specifications., – the contractor will rectify the dimensions at the construction site., – this plan must be verified on site with the corresponding installations., – no scale will be taken at this level., – levels in meters., – the levels are to masonry cloths, – dimensions in meters., indicates change of level in floor, level of finished floor, level low bed of ceiling, indicates change of finish in floor, indicates change of finish in ceiling, indicates change io wall finish, npt, nlbp, reference to plane with cuts
Raw text data extracted from CAD file:
| Language | Spanish |
| Drawing Type | Detail |
| Category | Construction Details & Systems |
| Additional Screenshots |
 |
| File Type | dwg |
| Materials | Concrete, Masonry, Steel, Other |
| Measurement Units | Metric |
| Footprint Area | |
| Building Features | Garden / Park, Parking |
| Tags | anchored, autocad, betonsteine, block, concrete block, DETAIL, DWG, flagstone, part, steel, wall, walls |