ADVERTISEMENT

ADVERTISEMENT

Water Tank High DWG Section for AutoCAD

WaterTank 18m. high – Plants – Sections – Elevations – Details – Concrete

Drawing labels, details, and other text information extracted from the CAD file (Translated from Spanish):

typical, circular, underside, Circular reinforcement, note:, Esc., Reservoir bridge beam, typical, cut, Esc., Cm., concrete, steel, Overlaps, Portland cement type I: general, Permissible terrain capacity, Coatings, Wall of the tub, Cylindrical shaft, F’c for the flooring of the foundation, Limit the relation water cement for bottom walls of the tub, F and astm degree, Ft df study of, Foundation shoes in general cm., The overlaps should not be concentrated in the same section., Technical specifications, F’c for walls of the cupula vat, F’c for fuse wall, The inner surface of the cupula will be coated with, Coatings, Per step., Cast concrete, The maximum height for concrete casting must be mts., The inner surfaces in contact with the interior, Its proportion will be according to the manufacturer’s specifications., Others as indicated, Circ., Ref. Merid. At the start in these reinforcements when the spacing is less than one rod will be extended the next will stop successively, ring, detail, Esc., Dome rings, Reinforcement of the cylindrical walls bottom of the, ring, Esc., ring, covering, ring, Esc., Note: in the meridian reinforcement of the cover when the spacing arrives to be less than prolonged a rod will stop the next so on, In this area the dome of, Cover widens, Gradually from, Esc., Water estop, Note: stirrups, Are alternating, Boom box, From below towards, for the rest, Note: the height of the cylindrical shaft until the bottom of the ring will be m. Note: The circular reinforcement joint should not be concentrated in the same vertical section. Note: see circular reinforcement in box., Vertical reinforcement, Reservoir shaft, Polystyrene joint, expanded, radial, circular, ring, Measured on the sphere, ring, ring, Upper face, underside, Reinforcement to the center of thickness, Of the underside of the, Area of ​​enzanchamiento, ring, Ref., Esp. Igual, ring, ring, underside, Upper face, Spacing approx. In, On the outside of the, ring, The cupula, Reinforcement in, at startup, Circular ref., Ref.vertical:, section, Esc., High reservoir section, detail, ring, Ref. Circ., Ref. Circ., Ref. Vert. Extra in alternating with the, Ref. Circ., Alternates, Ref. Circ., Ref. Merid., Ref., detail, ring, detail, Circ., Esp. Same, Esc., ring, Ref., parallel, Circular ref., Ref. circular, Esp. Igual, Ref., Esp. Igual, Ref., Ref., Esp. Igual, Ref. circular, Ref. circular, Rest both, ring, Ref. central, Of how, Well-packed filling, Sole, Hardener, Concrete additive, radial, Ref. circular, circular, ring, Sole, Within a circle, Bottom mesh, Within a circle, Top mesh, underside, Reinforcement in, Upper face, reinforcement, Esc., Plant reinforcement in foundations, Radial between, For structures in contact with water, Structural system:, Structural walls, Tp sec., Ref., Portland cement type II:, For structures in contact with the ground, Biliary type in two layers., seismic, Analysis parameters, Typical detail of, Esc., In reservoir window, In reservoir door, Esc., Typical detail of professional reinforcement, Additional reinforcement, Ref. Circ., ring, detail, Ref. Merid., Alternating with the, Ref. Circ., Ref. Circ., Alternates, Ref. Circ., Esp. Same, Ref. Circ., Water estop, Spherical background, Reinforcement in, Conical trunk, See picture, Esc., ring, ring, ring, Reservoir shaft, Esc., High reservoir section, ring, Of how, Well-packed filling, Sole, Sole, Conical trunk of the tub, Plant reinforcement, Spherical backgrounds, rest

Raw text data extracted from CAD file:

Language Spanish
Drawing Type Section
Category
Additional Screenshots
File Type dwg
Materials Concrete, Steel, Other
Measurement Units
Footprint Area
Building Features Car Parking Lot
Tags , , , , , , , , , , , , , , , , ,

ADVERTISEMENT

CAD Drawings

Leave a Reply

ADVERTISEMENT