Housing between mediators – Plants – Elevations – Sections – Technical specifications
Drawing labels, details, and other text information extracted from the CAD file (Translated from Galician):
element, resistant class, modulus of elasticity, i_ to fibers, picture of characteristics of, wood sawn. Pino silvestre, beams and belts, admitted in us, superficial only, are not allowed, classification criteria, resin bags, diameter of knots on, cracks, average width of rings, growth, face, corner, gnawing, fiber deviation: gems, biological alterations, xylophagous, ends of, parts, supported, factory wall support. Isolated beam of the wall by means of neoprene bands that allow the ventilation. beam head protected by waterproofing resin, beams meeting, protection, protective products will be water soluble salts, autoclave treatment with empty pressure., all the structural elements will be subjected to one, the protection achieved by the protector will be equal or, forged beams of latticework with concrete swabs and top layer spilled in situ., corner, geometry, beam interaxial, -mallazo, parallel to the beam, perpendicular to beams, intercess, statist, pillars, partial coefficients of safety, coef., normal level of control, unfavoured effect, type of steel, structural, slabs, walls, beams, slabs, foundation, action, type, variable, permanent, permanent, non-constant, will be sealed by the brand Aenor, the steel, others, resist., effect fav., frame of characteristics according to ehe, concrete, foundation, recub., forged p.baixa, use, plasterwork, wrought iron, other concargas, the weight of other structural elements, It was considered individually for each one, concargas, total charge, overload, change of units, transverse armament, vertical armed, armed walls, longitudinal armament, reinforced slabs, vc, loads, overload of use, slabs, building installations, buried driving, sink of grounding, welded to the conducting cable, registrable chest, connection of the lines to the ground, with aluminothermic welding, grounding network, the specifications will be observed, contained in the specifications, concrete, gasket, support shafts, schematic of meetings, horizontal reinforcements, in the corners of the concrete, sealing gaskets, gasket, cleaning, concrete, sealed gasket, lift pit, connect with the structure of the parking lot, plaster, mallazo, compacted base, and saneada, formwork lost, cleaning concrete, arm. casting, closed forming, detail start of stairs, floor tile, floor, wall chain, reinforced transv, separators, cleaning concrete, reinforced lonx., stairwell, tolerance over, nominal dimension: property, test method, Specification, tolerance in rectitude, edges, bracket tolerance, moisture content, tolerance in density, mean inside, panel, formaldehyde content, mechanical characteristics, panels, forked loads, joining foot with wall of factory., loads on deck, section d, section e, section f, section g
