Comprehensive MEP Documentation for Two-Story Residence
This drawing presents the complete mechanical, electrical, and plumbing (MEP) design for a two-story residential building located in Adapazari, Sakarya, Turkey. The project encompasses both sanitary plumbing systems and hydronic heating installations across a ground floor and first floor layout.
Building Specifications:
– Structure: Reinforced concrete (BA) construction, class 3A
– Lot size: 519.31 m²
– Building configuration: Ground floor + 1 floor (Z+1)
– Location: 15 Temmuz Camili neighborhood, Ada 3211, Parcel 9
Plumbing System Details:
– Comprehensive sanitary drainage system with waste stacks ranging from Ø50mm to Ø100mm
– Cold water supply lines (TEMİZSU/SOĞUK SU) with 1/2″ to 1″ pipe diameters
– Hot water distribution (SICAK SU) with separate supply and return lines
– Waste pipe slopes specified at 1:50 and 1:100 ratios
– Detailed fixture connections including bathrooms, WCs, showers, and kitchen
Heating System Components:
– Floor heating system utilizing 14×0.8mm plastic-coated copper pipes
– Room-by-room heating load calculations (in Watts)
– Temperature zones: 20°C for living spaces, 24°C for bathrooms
– Heat load values ranging from approximately 285W to 2500W per zone
– Manifold connections for zone control
The drawing incorporates detailed specifications for each plumbing fixture, pipe sizing calculations, and flow requirements. Wall-mounted combi boiler provides domestic hot water and heating. The MEP design follows Turkish mechanical code requirements with proper venting and drainage provisions throughout the residence.
