Shaft Drive DWG Block for AutoCAD

Shaft Drive DWG Block for AutoCAD

The shaft drive is used in reduction of power ratings and ratios.

Drawing labels, details, and other text information extracted from the CAD file:

tape from vent before operation. is shipped no lubricant with proper grade gear oil before operation. lubrication and installation instructions enclosed., tape from vent before operation. is shipped no lubricant with proper grade gear oil before operation. lubrication and installation instructions enclosed., c.d., c.d., the lifting bolt is to be used to lift only the gear drive assembly with no other associated attachments or motor mounted to the gear drive. the lifting bolt is to be used for vertical lifting only. when multiple lifting bolts are the angle between the lifting bolt and the central multiple connect may not be greater than degrees from the vertical. other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories they are not to be used for lifting the gear drive or any equipment. by removing this the accepts responsibility and related liability including conveying these requirements to subsequent individuals. on gear drive assemblies supplied with mechanically attached lifting if you choose to remove this also remove the lifting bolt., warning, tape from vent before operation. is shipped no lubricant with proper grade gear oil before operation. lubrication and installation instructions enclosed., c.d., c.d., tape from vent before operation. is shipped no lubricant with proper grade gear oil before operation. lubrication and installation instructions enclosed., c.d., c.d., tape from vent before operation. is shipped no lubricant with proper grade gear oil before operation. lubrication and installation instructions enclosed., the lifting bolt is to be used to lift only the gear drive assembly with no other associated attachments or motor mounted to the gear drive. the lifting bolt is to be used for vertical lifting only. when multiple lifting bolts are the angle between the lifting bolt and the central multiple connect may not be greater than degrees from the vertical. other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories they are not to be used for lifting the gear drive or any equipment. by removing this the accepts responsibility and related liability including conveying these requirements to subsequent individuals. on gear drive assemblies supplied with mechanically attached lifting if you choose to remove this also remove the lifting bolt., warning, tape from vent before operation. is shipped no lubricant with proper grade gear oil before operation. lubrication and installation instructions enclosed., the lifting bolt is to be used to lift only the gear drive assembly with no other associated attachments or motor mounted to the gear drive. the lifting bolt is to be used for vertical lifting only. when multiple lifting bolts are the angle between the lifting bolt and the central multiple connect may not be greater than degrees from the vertical. other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories they are not to be used for lifting the gear drive or any equipment. by removing

Raw text data extracted from CAD file:

\LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. \A1;3.92 ±.03 [99.5 ±0.75] \A1;3.15 [80.0] \A1;2.99 [76.0] \A1;3.330 [84.58] C.D. \A1;2.330 [59.18] \A1;9.25 ±.12 [235.0 ±3.0] \A1;12.99 ±.12 [330.0 ±3.0] \A1;3.86 ±.06 [97.9 ±1.5] \A1;4.170 [105.918] \A1;4.97 ±.06 [126.1 ±1.5] \A1;4.288 [108.92] C.D. \A1;7.04 ±.06 [178.8 ±1.5] \A1;45° \A1;7.59 ±.010 [192.75 ±0.25] \A1;5.629 [142.97] \A1;2.939 [74.66] The lifting eye/eye bolt is to be used to lift ONLY the gear drive assembly with NO other associated attachments or motor mounted to the gear drive. The lifting eye/eye bolt is to be used for VERTICAL LIFTING ONLY. When multiple lifting eye's/eye bolts are provided, the chain/cable angle between the lifting eye/eye bolt and the central multiple CHAIN/CABLE CONNECT POINT, MAY NOT BE GREATER than 30 degrees from the vertical. Other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories (couplings, sprockets, motors, etc.) They are not to be used for lifting the gear drive or any driver/driven equipment. By REMOVING this TAG, the purchaser/installer accepts responsibility and related liability including conveying these requirements to subsequent user/maintenance individuals. On gear drive assemblies supplied with mechanically attached lifting eye's/eye bolts, IF YOU CHOOSE TO REMOVE THIS TAG, also remove the lifting eye/eye bolt. WARNING 8603499220 \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. \A1;1.4371 1.4365 [36.502] [36.486] \A1;8.66 ±.06 [220.0 ±1.5] \A1;5.17 ±.03 [131.3 ±0.75] \A1;4.33 [110.0] \A1;4.00 [101.6] \A1;1.585 1.581 [40.26] [40.16] \A1;2.760 [70.10] \A1; 3.698 [93.92] C.D. \A1;4.790 [121.67] \A1;5.55 ±.06 [141.0 ±1.5] \A1;4.78 ±.06 [121.1 ±1.5] \A1;15.12 ±.12 [384.0 ±3.0] \A1;10.59 ±.12 [269.0 ±3.0] \A1;8.12 [206.3] \A1;45° \A1;4.881 [123.98] C.D. \A1;3.062 [77.78] \A1;6.126 [155.60] 6.122 [155.50] \A1;3.54 ±.03 [89.9 ±0.75] \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. \A1;1.9371 1.9365 [49.202] [49.186] \A1;8.93 ±.06 [226.8 ±1.5] \A1;5.31 ±.03 [134.8 ±0.75] \A1;4.53 [115.0] \A1;3.98 [101.0] \A1;2.141 2.136 [54.39] [54.26] \A1;3.040 [77.22] \A1; 4.543 [115.40] C.D. \A1;5.670 [144.02] \A1;6.59 ±.06 [167.4 ±1.5] \A1;5.89 ±.06 [149.5 ±1.5] \A1;18.15 ±.12 [461.0 ±3.0] \A1;13.19 ±.12 [335.0 ±3.0] \A1;8.62 [218.9] \A1;6.317 [160.46] 6.314 [160.38] \A1;3.147 [79.93] \A1;4.42 ±.03 [112.4 ±0.75] \A1;45° \A1;5.866 [148.99] C.D. \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. The lifting eye/eye bolt is to be used to lift ONLY the gear drive assembly with NO other associated attachments or motor mounted to the gear drive. The lifting eye/eye bolt is to be used for VERTICAL LIFTING ONLY. When multiple lifting eye's/eye bolts are provided, the chain/cable angle between the lifting eye/eye bolt and the central multiple CHAIN/CABLE CONNECT POINT, MAY NOT BE GREATER than 30 degrees from the vertical. Other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories (couplings, sprockets, motors, etc.) They are not to be used for lifting the gear drive or any driver/driven equipment. By REMOVING this TAG, the purchaser/installer accepts responsibility and related liability including conveying these requirements to subsequent user/maintenance individuals. On gear drive assemblies supplied with mechanically attached lifting eye's/eye bolts, IF YOU CHOOSE TO REMOVE THIS TAG, also remove the lifting eye/eye bolt. WARNING 8603499220 \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. The lifting eye/eye bolt is to be used to lift ONLY the gear drive assembly with NO other associated attachments or motor mounted to the gear drive. The lifting eye/eye bolt is to be used for VERTICAL LIFTING ONLY. When multiple lifting eye's/eye bolts are provided, the chain/cable angle between the lifting eye/eye bolt and the central multiple CHAIN/CABLE CONNECT POINT, MAY NOT BE GREATER than 30 degrees from the vertical. Other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories (couplings, sprockets, motors, etc.) They are not to be used for lifting the gear drive or any driver/driven equipment. By REMOVING this TAG, the purchaser/installer accepts responsibility and related liability including conveying these requirements to subsequent user/maintenance individuals. On gear drive assemblies supplied with mechanically attached lifting eye's/eye bolts, IF YOU CHOOSE TO REMOVE THIS TAG, also remove the lifting eye/eye bolt. WARNING 8603499220 \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed. The lifting eye/eye bolt is to be used to lift ONLY the gear drive assembly with NO other associated attachments or motor mounted to the gear drive. The lifting eye/eye bolt is to be used for VERTICAL LIFTING ONLY. When multiple lifting eye's/eye bolts are provided, the chain/cable angle between the lifting eye/eye bolt and the central multiple CHAIN/CABLE CONNECT POINT, MAY NOT BE GREATER than 30 degrees from the vertical. Other exterior threaded or plain holes on this gear drive are for mounting the drive or drive accessories (couplings, sprockets, motors, etc.) They are not to be used for lifting the gear drive or any driver/driven equipment. By REMOVING this TAG, the purchaser/installer accepts responsibility and related liability including conveying these requirements to subsequent user/maintenance individuals. On gear drive assemblies supplied with mechanically attached lifting eye's/eye bolts, IF YOU CHOOSE TO REMOVE THIS TAG, also remove the lifting eye/eye bolt. WARNING 8603499220 \LWARNING! \lRemove tape from vent before operation. \H1.76x;\LWARNING! \H0.5682x;\lUnit is shipped DRY, NO LUBRICANT \fSwis721 BT|b0|i0|c0|p34;\H0.75x;Fill with proper grade gear oil before operation. \LSee lubrication and installation instructions enclosed.

Language	English
Drawing Type	Block
Category	Mechanical, Electrical & Plumbing (MEP)
Additional Screenshots
File Type	dwg
Materials	Other
Measurement Units
Footprint Area
Building Features
Tags	autocad, block, drive, DWG, electrical transformer, elektromotor, moteur électrique, motor elétrico, power, power supply, reduction, shaft, transformador, transformateur, transformator