Latrine Cad DWG Block for AutoCAD

MAP LATRINE VENTILATED DRY HOLE (PLANT AND COURTS) FOR COMMUNITY RURAL

Drawing labels, details, and other text information extracted from the CAD file (Translated from Spanish):

Thin rubbed finish, plant, Slab detail, Projection of the automatic closing mechanism, Roof projection, cut, cut, Footprint detail, Detail of union between slabs, Calamine, Specifications: minimum coating type treated wood, Notes: case of soft loose terrain walls of the pit will be reinforced with materials of the can be etc. In any case, space should be left for percolation. The flange of the latrine must protrude at least 100 cm from other material. The splicing between the base of the shed and the trunks will be done with wire # opening of the gate of the shed should be located perpendicularly the direction of the wind in case of wind zones very thrusters will be used to ensure the calamines. The trench will be used up to below the ground level. Then it will be filled will move the house. The calamine wood will be painted. Recommend light colors for zones, Esc .:, Mosquito net, Armella, string, Lead similar, air duct, hat, Galvanized calamine, Calamine splicing zone, Galvanized calamine, Earth compacted earth, cut, Galvanized calamine, Lead similar, string, Mosquito net, cut, Wooden rubber stopper similar, belt, Galvanized calamine sheets, Hinges, Staples, Staples, Earth compacted earth, Esc .:

Raw text data extracted from CAD file:

1.00 0.90 R0.04 0.05 0.05 0.05 0.05 0.15 0.05 0.05 0.05 0.05 0.65 0.20 0.25 0.25 0.25 R0.05 0.10 0.10 R0.10 2.20 R0.10 0.03 0.45 0.45 0.15 1.00 0.15 R0.03 R0.03 0.075 R0.010 R0.015 2.20 0.15 0.10 0.10 R0.05 R0.04 0.35 0.075 0.099 0.096 0.093 0.900 2.00 0.150 0.350 0.350 0.250 0.200 0.450 0.750 0.300 0.450 0.300 2.000 1.000 0.300 0.450 0.250 2.000 0.300 0.450 0.750 0.200 0.150 2.00 1.000 0.150 0.200 0.200 5 5 5 5 5 5 5 d3/8″ @.25 d3/8″@.25 ACABADO FROTACHADO FINO 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 PLANTA DETALLE DE LOSA A A B B 1 1 2 2 PROYECCION DEL MECANISMO DE CIERRE AUTOMATICO 5 5 5 5 5 PROYECCION DE TECHO 5 5 5 5 5 CORTE 1-1 5 CORTE 2-2 d3/8″ @.20 d3/8″@.25 h=.015 h=.010 DETALLE DE HUELLA DETALLE DE UNION ENTRE LOSAS 5 5 5 5 CALAMINA ESPECIFICACIONES: f’c= 175 Kg/cm2 f y= 4,200 Kg/cm2 RECUBRIMIENTO MINIMO 1″ MADERA TIPO “C”, TRATADA NOTAS: -EN CASO DE TERRENOS FLOJOS Ó BLANDOS LAS PAREDES DEL FOSO SE REFORZARAN CON MATERIALES DE LA ZONA, PUDIENDO SER : TRONCOS, PIEDRAS, ETC. -EN CUALQUIER CASO SE DEBE DEJAR ESPACIO PARA PERCOLACION. – EL REBORDE DE LA LETRINA DEBE SOBRESALIR POR LO MENOS 15 CM Y SERA DE TIERRA COMPAC- TADA U OTRO MATERIAL. – EL EMPALME ENTRE LA BASE DE LA CASETA CON LOS TRONCOS SE HARA CON ALAMBRE Nº 8 -LA ABERTURA DE LA PUERTA DE LA CASETA SE DEBE UBICAR PERPENDICULARMENTE A LA DIRECCION DEL VIENTO – EN CASO DE ZONAS DE VIENTO MUY FUERTE, SE USARAN TIRAFONES PARA ASEGURAR LAS CALAMINAS. – EL FOSO SE USARA HASTA 50 CM DEBAJO DEL NIVEL DEL TERRENO. LUEGO SE RELLENARA Y SE TRASLADARA LA CASETA. – LA CALAMINA Y MADERA SE PINTARAN. (SE RECOMIENDAN COLORES CLAROS PARA ZONAS CALIDAS) Esc.: 1/25 Esc.: 1/25 Esc.: 1/25 Esc.: 1/25 2.00 5 5 MALLA MOSQUITERO ARMELLA 1/2″ CORDEL PLOMO Ò SIMILAR TUBO DE VENTILACION SOMBRERO d 4″ CALAMINA GALVANIZADA 1.83X0.83X0.03 m 5 1″X3″ 1″X2″ ZONA DE EMPALME DE CALAMINA 1″X3″ CALAMINA GALVANIZADA 1.83X0.83X0.03 m 2″X2″ 5 5 5 6″ 6″ 5 5 5 5 5 1.60 A TERRAPLEN TIERRA COMPACTADA 5 CORTE A-A 5 6″ 5 5 1″X3″ 1″X3″ 1.60 A 5 6″ 5 5 5 5 2″X4″ 2″X2″ CALAMINA GALVANIZADA 1.83X0.83X0.03 m PLOMO Ò SIMILAR CORDEL MALLA MOSQUITERO 5 2.00 CORTE B-B 5 1″X3″ TOPE DE MADERA Y CAUCHO Ó SIMILAR 5 CORREA 1″X2″ 2 PLANCHAS DE CALAMINA GALVANIZADA 1.83X0.83X0.03 m 5 5 BISAGRAS DE 3″ BISAGRAS DE 3″ BISAGRAS DE 3″ GRAPAS DE 6″ X .30 d GRAPAS DE 6″ X .30 d TERRAPLEN TIERRA COMPACTADA Esc.: 1/25 Esc.: 1/25 A2 1/25