Chinese Palace DWG Block for AutoCAD

Chinese Palace DWG Block for AutoCAD

Chinese palace – Main facade with distinctive features of Chinese culture

Drawing labels, details, and other text information extracted from the CAD file (Translated from Italian):

louis khan phillips library exeter academy new, type prospect, section, ground floor plan, first floor plan, flat plan, bathtub, min, minimum clear width, for single wheelchair, min, minimum clear width, for two wheelchairs, min, wheelchair turning space, min, space for, min, turns, min, clear floor space, forward approach, parallel approach, clear floor space, in alcoves, clear floor space, in alcoves, additional maneuvering, clearance for alcove, clearance for alcove, additional maneuvering, min, turn, min, turns around, min, an obstruction, hoistway and elevator entrances, min, for elevator car, min, minimum dimensions, for elevator car, min, minimum dimensions, main, entry, floor, closed, door, open, door, emergency, alarm, emergency, stop, but the is not, shall be raised, octagon symbol, control button diameter, numeral height, panel detail, min, max, car control height, with car, alternate locations of a panel, with car, alternate locations of a panel, min, preferred, front approach, swinging door, pull side, min, front approach, swinging door, push side, note: min., if door has both, closer and latch, hinge side approach, swinging door, pull side, note: min. if, min. if, min, side approach, swinging door, push side, note: min., if door has both, closer and latch, min, latch side approach, swinging door, pull side, note: min. if the door has closer, min, latch side approach, swinging door, push side, note: min. if the door has closer, min, front approach, sliding or folding doors, min, slide side approach, sliding or folding doors, min, latch side approach, sliding or folding doors, min, min, two hinged doors in series, min, two hinged doors in series, max, spout height and, max, knee clearance, min, equipment allowed, in shaded area, min, clear floor space, max, min, fountain or cooler, min, fountain or cooler, not to exceed, fountain depth, min, clear floor space, at water closet, min, lav., clear, floor, space, min, clear floor space, at water closet, min, min, lav., clear, floor, space, min, clear floor space, at water closet, min, clear, floor, space, back wall, grab bars at water closets, min, side wall, grab bars at water closets, min, min, toilet, paper, min, standard stall, max, min, alternated, door location, max, min, w. flr. mounted w.c., w. wall mounted w.c., min, max, min latch, approach only, other approaches, min, standard stall of, min, clear, floor, min, w. flr. mounted w.c., w. wall mounted w.c., min, space, min, alternate stall, min, max, min, w. flr. mounted w.c., w. wall mounted w.c., min, min latch, min, other approaches, approach only, back wall of standard stall, min, alternate stall, max, min, min latch, min, other approaches, approach only, side wall of standard stall, max, min, toilet, paper, alternated, clear floor space at bathtub, clear, floor, min, space, lav., back, head, foot, seat, with seat in tub, clear floor space at bathtub, clear, floor, min, space, lav., back, head, foot, seat, with seat in tub, clear floor space at bathtub, clear, floor, min, space, lav., back, head, foot, seat, with seat at the head of the tub, with seat in tub, grab bars at the bathtub, min, control, area, foot, with seat in tub, grab bars at the bathtub, max, back, max, with seat in tub, grab bars at the bathtub, min, head, seat, with seat at the head of the tub, grab bars at the bathtub, min, control, area, foot, with seat at the head of the tub, grab bars at the bathtub, max, back, max, min, with seat at the head of the tub, grab bars at the bathtub, head, by stall, shower size and clearances, control wall, seat wall, back, min, by stall, shower size and clearances, side, min, max, lav., shower seat design, max, full depth of stall, max, by stall, grab bars at the shower stall, seat wall, by stall, grab bars at the shower stall, back, by stall, grab bars at the shower stall, control wall, max, area, control, by stall, grab bars at the shower stall, head, by stall, grab bars at the shower stall, back, max, max, control, area, by stall, grab bars at the shower stall, foot, side reach possible, mounting height and, elevation, clearances for telephone, any width, max, or below, the height to the highest operable, parts that are essential to, basic operation of the telephone, side reach possible, clearances for telephone, min, max, plan, forward reach required, mounting height and, elevation, clearances for telephone, see plan, max, or below, the height to the highest operable, parts that are essential to, basic operation of the telephone, forward reach required, clearances for telephone, min, max, plan, max, forward reach required, clearances for telephone, min, max, plan, more than, min, space needed for, dimensions of, toe, seat, lap, eye level, armrest, handle, wheelchair, dimensions of, wheelchair, dimensions of, wheelchair, radius, dimensions of, wheelchair, radius, dog technique, dog technique, peace, there is space available at end row, min, accessible route, universal parking space design, min, accessible route, min, lav., seat, min, to

Raw text data extracted from CAD file:

\A1;1.1 \A1;0.5 \A1;1.1 \A1;0.5 \A1;1.1 \A1;0.5 \A1;1.14 \A1;0.5 \A1;1.08 \A1;0.5 \A1;1.1 \A1;0.5 \A1;1.12 \A1;0.5 \A1;1.14 \A1;0.1 \A1;0.1 \A1;0.1 \A1;0.2 \A1;1.1 \A1;0.2 \A1;1.5 \A1;1.75 \A1;1.8 \A1;1.6 \A1;1.2 \A1;0.1 \A1;1.1 \A1;0.1 \A1;0.95 \A1;1.9 \A1;6.8 \A1;54° \A1;99° \A1;0.5 \A1;3.95 \A1;0.5 \A1;6.15 \A1;0.4 \A1;6.15 \A1;0.4 \A1;6.15 \A1;0.4 \A1;6.15 \A1;0.5 \A1;3.95 \A1;0.5 \A1;3 \A1;29.7 \A1;3 \A1;35.7 \A1;0.5 \A1;3.95 \A1;0.5 \A1;6.15 \A1;0.4 \A1;6.15 \A1;0.4 \A1;6.15 \A1;0.4 \A1;6.15 \A1;0.5 \A1;3.95 \A1;0.5 \A1;3 \A1;29.7 \A1;3 \A1;35.7 \A1;3.94 \A1;0.5 \A1;3.9 \A1;0.5 \A1;3.94 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;0.5 \A1;Ap \A1;2.66 \A1;0.2 \A1;3.6 \A1;2.45 \A1;8 \A1;2.45 \A1;0.5 \A1;0.5 \A1;1 \A1;1 \A1;1.8 \A1;0.2 \A1;2.85 \A1;3.3 \A1;0.2 \A1;3 \A1;0.6 \A1;0.85 \A1;0.85 \A1;0.4 \A1;0.85 \A1;0.5 \A1;1.1 \A1;0.5 \A1;0.9 \A1;2.1 \A1;0.9 \A1;11.4 \A1;12.9 \A1;11.4 \A1;0.5 \A1;1 \A1;1.4 \A1;1.1 \A1;1 \A1;0.5 \A1;3.8 \A1;0.5 \A1;1.6 \A1;1 \A1;0.4 \A1;10.1 \A1;0.4 \A1;1 \A1;1.6 \A1;0.5 \A1;3.8 \A1;0.5 \A1;1 \A1;1.1 \A1;1.4 \A1;1 \A1;0.5 \A1;45° \A1;0.5 \A1;0.5 \A1;3.17 \A1;0.3 \A1;3.17 \A1;0.3 \A1;3.17 \A1;0.65 \A1;1.31 \A1;0.8 \A1;1.31 \A1;0.65 \A1;\U+22050.3 \A1;0.7 \A1;0.2 \A1;0.2 \A1;0.4 \A1;0.2 \A1;9.8 \A1;2.6 \A1;10.9 \A1;2.6 \A1;9.8 \A1;0.2 \A1;1.83 \A1;0.2 \A1;60° \A1;2.3 \A1;0.8 \A1;1.7 \A1;0.2 \A1;3.1 \A1;0.8 \A1;1.7 \A1;0.2 \A1;3.1 \A1;0.8 \A1;1.7 \A1;0.2 \A1;3.1 \A1;0.8 \A1;1.7 \A1;0.2 \A1;3.45 \A1;0.45 \A1;26.3 \A1;0.8 \A1;1 \A1;0.25 \A1;2.95 \A1;0.05 \A1;0.05 \A1;0.05 \A1;0.05 \A1;0.8 \A1;1.85 \A1;0.25 \A1;2.05 \A1;0.1 \A1;0.15 \A1;0.05 \A1;0.2 \A1;2.1 \A1;5.05 \A1;0.2 \A1;2.9 \A1;2.9 \A1;2.9 \A1;2.9 \A1;2.9 \A1;2.9 \A1;3.4 \A1;5.3 \A1;1.8 \A1;0.6 \A1;1.5 \A1;0.25 \A1;2.45 \A1;0.45 \A1;2.65 \A1;0.25 \A1;2.65 \A1;0.25 \A1;2.65 \A1;0.25 \A1;2.65 \A1;0.25 \A1;2.65 \A1;0.25 \A1;2.65 \A1;0.25 \A1;2.65 \A1;5.04 \A1;0.25 \A1;1.2 \A1;0.5 \A1;2.4 \A1;1.1 \A1;6.9 \A1;1 \A1;5.7 \A1;0.5 \A1;5.7 \A1;1 \A1;6.9 \A1;1.1 \A1;2.4 \A1;0.5 \A1;1.2 \A1;38.1 \A1;0.6 \A1;1.5 \A1;0.25 \A1;2.45 \A1;0.2 \A1;0.45 \A1;2.1 \A1;0.8 \A1;0.8 \A1;1.85 \A1;0.1 \A1;2.25 \A1;0.8 \A1;0.8 \A1;1 \A1;0.1 \A1;3.1 \A1;0.8 \A1;0.8 \A1;1 \A1;0.1 \A1;3.1 \A1;0.55 \A1;2.15 \A1;3.1 \A1;0.8 \A1;0.25 \A1;0.75 \A1;0.15 \A1;0.25 \A1;0.3 \A1;3 \A1;0.3 \A1;1 \A1;4.3 \A1;0.5 \A1;2.9 \A1;4.7 \A1;3.85 \A1;0.15 \A1;5.3 \A1;0.5 \A1;1.3 \A1;1.3 \A1;0.4 \A1;10.1 \A1;0.4 \A1;1.3 \A1;1.3 \A1;5.8 \A1;0.15 \A1;3.85 \A1;9.8 \A1;2.6 \A1;10.9 \A1;2.6 \A1;9.8 \A1;0.3 \A1;0.3 \A1;0.4 \A1;0.2 \A1;0.2 \A1;0.6 \A1;0.4 \A1;0.3 \A1;1.1 \A1;0.3 \A1;1.45 \A1;0.8 \A1;0.8 \A1;0.2 \A1;1.7 \A1;1.45 \A1;0.55 \A1;0.15 \A1;2 \A1;0.55 \A1;0.35 \A1;0.5 \A1;4.3 \A1;1 \A1;0.3 \A1;3 \A1;0.3 \A1;0.25 \A1;0.2 \A1;0.2 \A1;0.2 \A1;0.2 \A1;0.4 \A1;1.85 \A1;0.65 \A1;2.9 \A1;2.64 \A1;0.25 \A1;1.9 \A1;0.15 \A1;0.15 \A1;0.25 \A1;0.2 \A1;0.05 \A1;0.05 \A1;0.2 \A1;1.4 \A1;0.25 \A1;0.3 \A1;0.8 \A1;0.55 \A1;0.08 \A1;0.2 \A1;0.1 \A1;0.1 \A1;1.45 \A1;1.45 \A1;0.2 \A1;2.9 \A1;0.4 \A1;0.1 \A1;2.9 \A1;2.45 \A1;1.45 \A1;0.15 \A1;1.15 \A1;0.15 \A1;5.8 \A1;0.4 \A1;1 \A1;1.25 \A1;0.65 \A1;0.1 \A1;0.1 \A1;1.1 \A1;0.3 \A1;4.2 \A1;3.9 \A1;4.2 \A1;2.25 \A1;0.65 \A1;1.25 \A1;1 \A1;0.4 \A1;0.9 \A1;0.05 \A1;0.1 \A1;0.35 \A1;0.2 \A1;0.25 \A1;3.6 \A1;0.15 \A1;5.8 \A1;1.3 \A1;13.5 \A1;1.3 \A1;5.8 \A1;0.15 \A1;3.6 \A1;0.25 \A1;0.3 \A1;3 \A1;0.3 \A1;1 \A1;3.1 \A1;2.2 \A1;0.65 \A1;0.25 \A1;0.55 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;0.4 \A1;2.25 \A1;2.25 \A1;4.2 \A1;1.5 \A1;0.25 \A1;1 \A1;1.2 \A1;0.25 \A1;1.2 \A1;0.5 \A1;1 \A1;1.4 \A1;2.1 \A1;0.3 \A1;5.6 \A1;1 \A1;5.75 \A1;0.4 \A1;5.75 \A1;1 \A1;4.5 \A1;0.3 \A1;1 \A1;1.2 \A1;1 \A1;1.4 \A1;1 \A1;0.5 \A1;1.2 \A1;0.9 \A1;0.05 \A1;0.05 \A1;0.3 \A1;0.05 \A1;0.9 \A1;0.9 \A1;0.9 \A1;0.9 \A1;0.25 \A1;0.18 \A1;0.9 \A1;0.7 \A1;0.2 \A1;0.8 \A1;0.1 \A1;0.9 \A1;0.3 \A1;0.3 \A1;0.1 \A1;0.5 \A1;0.4 \A1;0.5 \A1;0.95 \A1;0.1 \A1;1.05 \A1;0.9 \A1;45° \A1;0.5 \A1;0.33 \A1;2.22 \A1;2.28 \A1;1.05 \A1;2.22 \A1;1.05 \A1;0.33 \A1;0.4 \A1;0.32 \A1;0.1 \A1;0.05 \A1;0.3 \A1;0.2 \A1;0.3 \A1;0.5 \A1;0.5 \A1;0.5 \A1;1 \A1;1.4 \A1;1.1 \A1;1 \A1;4.8 \A1;1.6 \A1;0.5 \A1;0.4 \A1;0.05 \A1;0.3 \A1;0.4 \A1;0.3 \A1;0.4 \A1;0.6 \A1;0.4 \A1;0.55 \A1;0.95 \A1;0.95 \A1;0.95 \A1;0.95 \A1;1 \A1;0.5 \A1;3.8 \A1;0.5 \A1;1.6 \A1;1.4 \A1;1.1 \A1;0.96 \A1;0.96 \A1;0.96 \A1;0.96 \A1;0.96 \A1;4.8 \A1;0.4 \A1;1.8 \A1;0.15 \A1;2.75 \A1;0.3 \A1;0.76 \A1;0.3 \A1;0.9 \A1;6.46 \A1;0.4 \A1;0.35 \A1;0.15 \A1;2.06 \A1;0.2 \A1;1.94 \A1;0.3 \A1;0.76 \A1;0.3 \A1;6.46 \A1;1.4 \A1;0.15 \A1;1.1 \A1;0.51 \A1;0.15 \A1;1.35 \A1;0.4 \A1;0.2 \A1;1.6 \A1;0.4 \A1;0.05 \A1;0.06 \A1;0.05 \A1;0.4 \A1;0.1 \A1;0.05 \A1;0.05 \A1;0.05 \A1;0.85 \A1;0.05 \A1;0.25 \A1;0.4 \A1;0.25 \A1;0.9 \A1;1.38 \A1;2.22 \A1;1.05 \A1;2.22 \A1;1.05 \A1;0.3 \A1;1 \A1;1.25 \A1;0.15 \A1;0.5 \A1;0.81 \A1;1.44 \A1;1.7 \A1;0.5 \A1;1.8 \A1;0.2 \A1;2.85 \A1;0.9 \A1;4.85 \A1;2.2 \A1;1.3 \A1;0.8 \A1;1.3 \A1;0.05 \A1;0.3 \A1;1.8 \A1;0.3 \A1;0.35 \A1;1.95 \A1;1.6 \A1;0.1 \A1;0.3 \A1;0.5 \A1;0.3 \A1;2.35 \A1;0.3 \A1;0.75 \A1;0.6 \A1;1.2 \A1;0.6 \A1;0.5 \A1;2.4 \A1;3.75 \A1;3.15 \A1;6.9 \A1;6.9 \A1;1.25 \A1;0.4 \A1;0.05 \A1;0.4 \A1;1.25 \A1;0.4 \A1;0.05 \A1;0.25 \A1;0.4 \A1;0.2 \A1;0.9 \A1;1.05 \A1;2.23 \A1;0.32 \A1;0.4 \A1;0.32 \A1;2.22 \A1;1.05 \A1;2.23 \A1;0.32 \A1;0.5 \A1;0.55 \A1;0.9 \A1;2.5 \A1;0.5 \A1;1.26 \A1;4.5 \A1;0.3 \A1;1 \A1;0.3 \A1;0.8 \A1;1.4 \A1;1 \A1;0.5 \A1;1.3 \A1;0.4 \A1;1.25 \A1;0.4 \A1;0.1 \A1;0.45 \A1;0.45 \A1;0.45 \A1;0.05 \A1;0.6 \A1;0.04 \A1;0.4 \A1;6.15 \A1;0.5 \A1;0.45 \A1;1.1 \A1;1.15 \A1;0.2 \A1;1.15 \A1;0.2 \A1;45° \A1;0.4 \A1;0.05 \A1;1.2 \A1;0.05 \A1;1.2 \A1;0.05 \A1;0.9 \A1;0.3 \A1;0.3 \A1;1.6 \A1;0.1 \A1;6.46 \A1;2.1 \A1;1.4 \A1;1 \A1;0.5 \A1;0.4 \A1;6.15 \A1;0.5 \A1;0.45 \A1;1.1 \A1;0.32 \A1;0.4 \A1;0.33 \A1;0.4 \A1;0.1 \A1;0.3 \A1;0.05 \A1;0.1 \A1;1.03 \A1;2.22 \A1;1.05 \A1;2.22 \A1;2.27 \A1;3 \A1;0.2 \A1;0.1 \A1;0.3 \A1;0.64 \A1;0.2 \A1;0.89 \A1;0.05 \A1;1 \A1;2.8 \A1;1 \A1;1 \A1;1.1 \A1;1.4 \A1;1 \A1;0.5 \A1;1.3 \A1;0.23 \A1;0.37 \A1;0.2 \A1;0.8 \A1;0.45 \A1;0.45 \A1;0.5 \A1;1 \A1;1.4 \A1;0.2 \A1;0.9 \A1;2.8 \A1;2.4 \A1;0.1 \A1;5.6 \A1;6.8 \A1;2.86 \A1;2.4 \A1;0.1 \A1;1.95 \A1;0.25 \A1;2.2 \A1;54° \A1;99° \A1;0.75 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 Ap 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 LOUIS KHAN - BIBLIOTECA DELLA PHILLIPS EXETER ACADEMY - New Hampshire, 1965-1971 PROSPETTO TIPO SEZIONE A-A' SEZIONE B-B' PIANTA PIANO TERRA PIANTA PIANO PRIMO PIANTA PIANO 3 E 5 PIANTA PIANO 4 6 1000 3000 \A1;4000 \A1;2000 \A1;4000 \A1;150 \A1;9945 \A1;1500 \A1;3000 \A1;645 \A1;2000 \A1;2800 \A1;4500 \A1;2645 \A1;2800 \A1;1300 \A1;1050 \A1;650 \A1;4000 \A1;6000 \A1;10000 1000 3000 1000 3000 1000 3000 \U+73BB\U+7483\U+5149\U+9876 5 5 3.400 7.400 5 3.250 5 5 5 5 5 5 5 5 5 13.400 16.400 17.900 18.545 20.545 23.345 5 5 5 14.450 5 5 9.400 5 \U+77F3\U+827A\U+7F16\U+53F7 12 \U+77F3\U+827A\U+7F16\U+53F7 14 ML \U+7279 (01) 28" \U+9E31\U+543B ML \U+7279 (01) 28" \U+8349\U+82B1\U+810A ML \U+7279 (01) 20" \U+82B1\U+8349\U+6536\U+53E3\U+810A ML \U+7279 (01) \U+82B1\U+8349\U+6536\U+53E3\U+810A ML \U+7279 (01) 14" \U+8349\U+82B1\U+810A 14" ML \U+7279 (01) \U+82B1\U+8349\U+6536\U+53E3\U+810A ML \U+7279 (01) \U+8349\U+82B1\U+810A 10" 10" ML \U+7279 (01) \U+82B1\U+8349\U+6536\U+53E3\U+810A ML \U+7279 (01) \U+8349\U+82B1\U+810A 12" 12" \U+77F3\U+827A\U+7F16\U+53F7 15 \U+77F3\U+827A\U+7F16\U+53F7 18 ML \U+7279 (01) 20" \U+8349\U+82B1\U+810A ML \U+7279 (01) 14" \U+534A\U+8FB9\U+8349\U+82B1\U+810A \U+6EE1\U+9762\U+74E6 ML009 \U+6EE1\U+9762\U+7B52 ML002 \U+5149\U+74E6 ML008 \U+5149\U+7B52 ML001 1 \U+6728\U+827A\U+7F16\U+53F7 \U+77F3\U+827A\U+7F16\U+53F7 21 \U+77F3\U+827A\U+7F16\U+53F7 7 \U+77F3\U+827A\U+7F16\U+53F7 5 \U+77F3\U+827A\U+7F16\U+53F7 6 \U+77F3\U+827A\U+7F16\U+53F7 10 \U+77F3\U+827A\U+7F16\U+53F7 5 \U+77F3\U+827A\U+7F16\U+53F7 6 \U+77F3\U+827A\U+7F16\U+53F7 8 \U+77F3\U+827A\U+7F16\U+53F7 11 \U+77F3\U+827A\U+7F16\U+53F7 10 \U+77F3\U+827A\U+7F16\U+53F7 9 \U+77F3\U+827A\U+7F16\U+53F7 9 \U+77F3\U+827A\U+7F16\U+53F7 9 \U+77F3\U+827A\U+7F16\U+53F7 \U+6728\U+5929\U+82B1 \U+77F3\U+827A\U+7F16\U+53F7 19 \U+77F3\U+827A\U+7F16\U+53F7 27 \U+620F\U+53F0\U+6728\U+5730\U+677F \U+6D88\U+9632\U+6C34\U+6C60 1.700 ±0.000 ( ) \U+6D77\U+9762 1000 3000 1000 3000 1000 3000 \U+6EE1\U+9762\U+74E6 ML009 \U+6EE1\U+9762\U+7B52 \U+5149\U+74E6 ML008 \U+5149\U+7B52 ML001 ML002 \U+77F3\U+827A\U+7F16\U+53F7 3 \U+77F3\U+827A\U+7F16\U+53F7 15 \U+77F3\U+827A\U+7F16\U+53F7 23 \U+77F3\U+827A\U+7F16\U+53F7 26 \U+77F3\U+827A\U+7F16\U+53F7 24 \U+77F3\U+827A\U+7F16\U+53F7 3 \U+77F3\U+827A\U+7F16\U+53F7 23 \U+77F3\U+827A\U+7F16\U+53F7 26 \U+77F3\U+827A\U+7F16\U+53F7 24 9 \U+77F3\U+827A\U+7F16\U+53F7 8 5 \U+77F3\U+827A\U+7F16\U+53F7 7 9.750 11.400 1000 3000 1000 3000 1000 3000 1000 3000 1000 3000 1000 3000 9.750 \U+6728\U+5929\U+82B1 \U+767E\U+9875\U+7A97\U+6392\U+70DF\U+53E3 11.400 BATHTUB BATHTUB 32 min 36 min Minimum Clear Width for Single Wheelchair 60 min Minimum Clear Width for Two Wheelchairs 60 min 60 min Wheelchair Turning Space 36 min 60 min T-Shaped Space for 12 min 12 min 180° Turns 36 min 48 30 Clear Floor Space 48 30 Forward Approach 48 30 Parallel Approach 48 30 Clear Floor Space X in Alcove 48" 30" Clear Floor Space X in Alcove X 30" Additional Maneuvering Clearance for Alcove 6 48 X Clearance for Alcove 12 Additional Maneuvering 36 min 36 min 90° Turn 48 min 36 min 48 min 42 min Turns Around X 42 min an Obstruction Hoistway and Elevator Entrances 42 60 72 min for Elevator Car 54 min 51 min 36 min 80 min Minimum Dimensions for Elevator Car 54 min 51 min 36 min 68 min Minimum Dimensions 7 5 6 8 S 1 2 B main entry floor closed door open door emergency alarm emergency stop but the X is not shall be raised octagon symbol control button diameter numeral height 5/8 3/4 Panel Detail 7 5 6 8 S 1 2 B 4 3 35 min 54 max Car Control Height with Center-Opening Car Alternate Locations of Panel with Side-Opening Car Alternate Locations of Panel 60 min 18 min, 24 preferred Front Approach - Swinging Door pull side 48 min X Front Approach - Swinging Door push side NOTE: X = 12" min. if door has both a closer and latch Y X Hinge Side Approach - Swinging Door pull side NOTE: X = 36" min. if Y = 60" X = 42" min. if Y = 54" 42 min 54 min Side Approach - Swinging Door push side NOTE: Y = 48" min. if door has both a closer and latch Y 48 min 24 min Latch Side Approach Swinging Door pull side NOTE: Y = 54" min. if door has closer X Y 42 min 24 min Latch Side Approach Swinging Door push side NOTE: Y = 48" min. if door has closer X Y 48 min Front Approach - Sliding or Folding Doors 42 min Slide Side Approach - Sliding or Folding Doors 54 min 42 min Latch Side Approach - Sliding or Folding Doors 24 min X 48 min Two Hinged Doors in Series 48 min Two Hinged Doors in Series 36 max 17-19 Spout Height and 6 max Knee Clearance 27 min 9 min 8 min equipment permitted in shaded area 30 min 48 min Clear Floor Space 24 max 17-19 30 min 48 min Free-Standing Fountain or Cooler 30 min 48 min Built-in Fountain or Cooler not to exceed fountain depth 48 min 66 min Clear Floor Space at Water Closet 36 min 18 18 lav. clear floor space min 48 min 56 min Clear Floor Space at Water Closet 36 min 18 min lav. clear floor space 18 60 min 56 min Clear Floor Space at Water Closet 42 min 18 clear floor space 33-36 Back Wall Grab Bars at Water Closets 36 min 12 min 36 min 12 min 33-36 Side Wall Grab Bars at Water Closets 54 min 42 min 12 19 min 17-19 toilet paper 52 min 36 min Standard Stall 4 max 32 min alternate door location 12 max 56 min 59 min w. flr. mounted w.c. w. wall mounted w.c. 32 min 60 min 6 max 4 max 18 42 min latch approach only other approaches 48 min Standard Stall (end of row) 36 min clear floor 56 min 59 min w. flr. mounted w.c. w. wall mounted w.c. 60 min 18 space 54 min Alternate Stall 42 min 12 max 12 max 66 min 69 min w. flr. mounted w.c. w. wall mounted w.c. 32 min 36 min 18 42 min latch 48 min other approaches approach only 33-36 Back Wall of Standard Stall 36 min 54 min Alternate Stall 12 max 32 min 48 min 18 42 min latch 48 min other approaches approach only 33-36 Side Wall of Standard Stall 40(42)min 36 max 12 max 19 min 17-19 toilet paper alternate Clear Floor Space at Bathtub clear floor 60 min 30 min space lav. back head foot seat With Seat in Tub Clear Floor Space at Bathtub clear floor 60 min 48 min space lav. back head foot seat With Seat in Tub Clear Floor Space at Bathtub clear floor 75 min 30 min space lav. back head foot seat With Seat at Head of Tub With Seat in Tub Grab Bars at Bathtub 24 min control area foot With Seat in Tub Grab Bars at Bathtub 12 max back 24 max 24 max 33-36 9 With Seat in Tub Grab Bars at Bathtub 12 min head seat With Seat at Head of Tub Grab Bars at Bathtub 24 min control area foot With Seat at Head of Tub Grab Bars at Bathtub 12 max back 15 max 48 min 33-36 9 With Seat at Head of Tub Grab Bars at Bathtub head 36" by 36" Stall Shower Size and Clearances control wall seat wall back 48 min 36 min 36 min 36 30" by 60" Stall Shower Size and Clearances side side 60 min 36 min 30 min 27 max lav. Shower Seat Design 16 max full depth of stall 15 max 23 max 1-1/2 max 1-1/2 max 36" by 36" Stall Grab bars at Shower Stall seat wall 18 36" by 36" Stall Grab bars at Shower Stall back 18 33-36 36" by 36" Stall Grab bars at Shower Stall control wall 18 33-36 38 max 48 max area control 36" by 60" Stall Grab bars at Shower Stall head 33-36 36" by 60" Stall Grab bars at Shower Stall back (long) 27 max 33-36 38 max 48 max control area 36" by 60" Stall Grab bars at Shower Stall foot Side Reach Possible Mounting Height and elevation Clearances for Telephone Any width 54 max * 27 or below * Height to highest operable parts which are essential to basic operation of telephone Side Reach Possible Clearances for Telephone 48 min 30 min 10 max plan Forward Reach Required Mounting Height and elevation Clearances for Telephone see plan 48 max * 27 or below * Height to highest operable parts which are essential to basic operation of telephone Forward Reach Required Clearances for Telephone 30 min 48 20 max plan 24 max Forward Reach Required Clearances for Telephone 30 min 48 20 max plan more than 24 6 min 60 min 78 min Space Needed for U-turn Dimensions of Adult-Sized 27 8 19 43-51 toe seat lap eye level 30 36 armrest handle Wheelchair Dimensions of Adult-Sized 26 42 18 Wheelchair 6 Dimensions of Adult-Sized 7 17 30 Wheelchair 48 c L L c 6 L c c L 31 radius 7 24 24 Dimensions of Adult-Sized 7 12 30 Wheelchair 48 c L L c L c c L 17 radius 7 10 10 9 Cane Technique 6 6 27 Cane Technique 6 6 36-60 pace Van Accessible Space at End Row 96 min 96 min 96 min 60 min 252 min 36 accessible route Universal Parking Space Design 132 min 132 min 60 min 324 min 36 accessible route 132 min 18 lav. seat 32 60 min 18 90 30 30 Toilet Room 18 lav. seat 32 60 min 18 90 27 Toilet Room REAR ELEVATION ENTRANCE SEASIDE, FLORIDA Plumilla 0.2 0.2 0.5 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 ARKICAD 280 330 250 250 COTAS EN cm ESCALA 1/50 WC -1.0 CASETA-VESTUARIO PARA 60 TRABAJADORES SECCION A-A' HIDROMEZCLADORA DUCHAS Y LAVABOS CON GRIFERIA DE 4cm DE ESPESOR POLIESTIRENO EXPANDIDO PARA HUECO DE PASO INTERIOR MURO RASGADO EN TODA SU ALTURA INMOVILIZACION VIGAS TRANSVERSALES VIGA DE MADERA 20X9cm CAJEADA PARA FIBROCEMENTO PLACA ONDULADA DE TABLON 20X9cm CORTAVIENTOS 1.067637507172039 1.020979647853804 1.067637507172039 \A1;1.20 \A1;0.20 \A1;1.20 \A1;1.40 \A1;0.25 \A1;1.40 \A1;0.20 \A1;4.40 \A1;1.00 \A1;5.00 \A1;1.00 \A1;0.40 \A1;0.50 \A1;2.10 \A1;1.00 \A1;10.00 \A1;1.20 \A1;0.20 \A1;1.20 \A1;1.40 \A1;0.25 \A1;1.40 \A1;0.20 \A1;2.60 \A1;0.20 \A1;2.60 \A1;8.40 \A1;2.55 \A1;1.20 \A1;0.20 \A1;2.60 \A1;0.20 ENERO 11 1985 LEY 24086 SEPT- 01 LAMINA: A-01 \A1;4.30 \A1;5.05 \A1;4.10 \A1;R1.08 \A1;2.04 \A1;1.10 \A1;5.05 \A1;7.10 \A1;0.25 \A1;0.70 \A1;0.30 \A1;4.00 \A1;0.80 \A1;1.00 \A1;1.90 \A1;0.40 \A1;0.70 \A1;0.25 \A1;0.80 \A1;0.80 \A1;0.90 \A1;0.80 \A1;0.80 \A1;1.00 \A1;0.70 \A1;2.88 \A1;1.85 \A1;0.94 \A1;1.30 \A1;2.70 \A1;5.05 \A1;4.00 \A1;1.95 \A1;R1.08 \A1;3.35 \A1;6.15 \A1;0.40 \A1;0.70 \A1;0.25 \A1;0.70 TERRAZA TERRAZA DORMIT. SSHH SSHH DORMIT. SSHH DORMIT. TERRAZA PUENTE PROYECCION DE TECHO PROYECCION DE TECHO PROYECCION DE TECHO LINEAS DE PROYECCION PROYECCION DE TECHO A B A B A B A B A B A B SALA COCINA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 CORTE A - A 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 CASA DE LA CORTE B - B CASCADA PLANO: PRIMERA PLANTA ESCALA: 1:50 FECHA: SEPT- 01 C.A.D.: El Grupo OBSERVACIONES: PLANO: CORTE B - B ESCALA: 1:50 FECHA: C.A.D.: El Grupo OBSERVACIONES: PLANO: SEGUNDA PLANTA ESCALA: 1:50 FECHA: C.A.D.: El Grupo OBSERVACIONES: PLANO: TERCERA PLANTA ESCALA: 1:50 FECHA: C.A.D.: El Grupo OBSERVACIONES: PLANO: CORTE A - A ESCALA: 1:50 FECHA: C.A.D.: El Grupo OBSERVACIONES: LAMINA: A-01 SEPT- 01 LAMINA: A-02 SEPT- 01 LAMINA: A-03 SEPT- 01 LAMINA: C-02 SEPT- 01 LAMINA: C-01 (FRANK LLOYD WRIGHT) FALLINGWATER CASA DE LA CASCADA (FRANK LLOYD WRIGHT) FALLINGWATER CASA DE LA CASCADA (FRANK LLOYD WRIGHT) FALLINGWATER CASA DE LA CASCADA (FRANK LLOYD WRIGHT) FALLINGWATER CASA DE LA CASCADA (FRANK LLOYD WRIGHT) FALLINGWATER PLANO: ELEVACION 01 ESCALA: 1:50 FECHA: C.A.D.: El Grupo OBSERVACIONES: SEPT- 01 LAMINA: E-01 CASA DE LA CASCADA (FRANK LLOYD WRIGHT) FALLINGWATER ELEVACION 1 PLANO: ELEVACION 02 ESCALA: 1:50 FECHA: C.A.D.: El Grupo OBSERVACIONES: SEPT- 01 LAMINA: E-02 CASA DE LA CASCADA (FRANK LLOYD WRIGHT) FALLINGWATER ELEVACION 2 E-1 E-2 E-1 E-2 E-1 E-2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 56,87 XXX 56,87 5 XXX 5 56,87 Arch. Giuseppe Conte \A1;.15 \A1;1 \A1;4 \A1;2 \A1;1 \A1;1.95 \A1;1 \A1;1 \A1;1.1 \A1;.8 \A1;21.9 \A1;1 \A1;4 \A1;2 \A1;1 \A1;1.95 \A1;1 \A1;1 \A1;1.1 \A1;.8 \A1;21.9 \A1;2.5 \A1;1 \A1;1 \A1;2.5 \A1;4 \A1;2.5 \A1;2 \A1;2.5 \A1;18 \A1;1.5 \A1;1 \A1;2 \A1;2.5 \A1;4 \A1;2.5 \A1;2 \A1;1 \A1;1.5 \A1;18 \A1;2.03 \A1;4 \A1;2.03 \A1;.46 \A1;2.38 \A1;2.38 \A1;2.38 \A1;.46 \A1;4.00 \A1;\U+22051.4 \A1;\U+22052 \A1;4.96 \A1;4.13 \A1;8.11 \A1;1.6 \A1;1.6 \A1;3.2 \A1;1.6 \A1;1.6 \A1;9.6 \A1;1.6 \A1;1.6 \A1;3.2 \A1;1.6 \A1;1.6 \A1;9.6 \A1;1.6 \A1;1.6 \A1;1.2 \A1;3.2 \A1;1.89 \A1;1.31 \A1;10.8 \A1;1.6 \A1;1.6 \A1;1.2 \A1;3.2 \A1;10.8 \A1;3.2 \A1;1.6 \A1;1.6 \A1;3.2 \A1;1.6 \A1;1.6 \A1;9.6 \A1;9.6 \A1;3.2 \A1;1.6 \A1;1.6 \A1;1.2 \A1;3.2 \A1;1.89 \A1;1.31 \A1;10.8 \A1;10.8 \A1;3.2 \A1;1.2 \A1;1.6 \A1;1.6 \A1;3.2 \A1;8.11 \A1;4.96 \A1;2.86 \A1;4.96 \A1;2.86 \A1;3.2 \A1;3.2 \A1;3 \A1;.2 \A1;3 \A1;.2 \A1;1 \A1;.6 \A1;8 \A1;8 \A1;13.53 \A1;4.87 \A1;15° \A1;5.41 \A1;12.78 \A1;18.36 \A1;36.71 \A1;45.73 \A1;35.88 \A1;14.38 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 -380.3857272322097 \A1;21.71 \A1;4.55 \A1;6.62 \A1;4.07 \A1;4.55 \A1;10.12 \A1;5.79 \A1;4.55 \A1;10.12 \A1;21.71 \A1;4.55 \A1;6.62 \A1;3.4 \A1;3.4 \A1;\U+22051.4 \A1;\U+22051.4 \A1;.8 \A1;2.2 \A1;4.96 \A1;21.71 \A1;4.55 \A1;6.62 \A1;4.55 \A1;10.12 \A1;5.79 \A1;21.71 \A1;4.55 \A1;6.81 \A1;4.55 \A1;21.71 \A1;4.55 \A1;.5 \A1;3.6 \A1;4.55 \A1;4.93 \A1;.9 \A1;1.54 \A1;.68 \A1;1.59 \A1;.68 \A1;.68 \A1;1.59 \A1;1.59 \A1;0.50 \A1;.68 \A1;.68 T v / [ \A1;0.70 \A1;2.00 \A1;0.70 \A1;3.00 \A1;0.30 \A1;3.20 \A1;0.80 \A1;0.30 \A1;0.45 \A1;4.00 \A1;1.00 \A1;0.80 \A1;3.20 \A1;0.30 \A1;1.00 \A1;4.00 \A1;0.45 \A1;0.30 \A1;2.30 \A1;4.00 \A1;4.00 \A1;4.00 \A1;1.50 \A1;1.20 \A1;1.20 \A1;1.20 \A1;15.00 \A1;9.00 \A1;2.00 \A1;1.40 \A1;1.20 \A1;1.20 \A1;1.20 \A1;1.50 \A1;15.40 \A1;4.20 \A1;0.10 \A1;0.50 \A1;2.05 \A1;0.85 \A1;0.85 \A1;2.05 \A1;0.50 \A1;4.20 \A1;0.10 \A1;2.05 \A1;0.10 \A1;4.20 \A1;0.50 \A1;2.05 \A1;0.85 \A1;0.85 \A1;0.50 \A1;4.20 \A1;0.10 \A1;15.40 \A1;4.60 \A1;13.60 \A1;0.10 \A1;4.60 \A1;4.20 \A1;0.10 \A1;13.60 \A1;4.20 \A1;4.60 \A1;0.10 \A1;0.10 \A1;4.60 \A1;2.05 \A1;15.40 \A1;0.85 \A1;0.85 \A1;2.05 \A1;0.50 \A1;4.20 \A1;0.10 \A1;0.10 \A1;4.20 \A1;0.50 \A1;0.10 \A1;4.60 \A1;4.60 \A1;4.20 \A1;13.60 \A1;0.10 \A1;15.40 \A1;2.05 \A1;4.20 \A1;0.50 \A1;2.05 \A1;0.85 \A1;0.85 \A1;0.10 \A1;0.50 \A1;4.20 \A1;0.10 \A1;13.60 \A1;4.20 \A1;4.60 \A1;0.10 \A1;0.10 \A1;4.60 21.70986858296118 21.70986858296118 5.789422456873922 10.12190564308554 21.70986858296121 6.811862224120489 21.70986858296118 21.70986858296121 6.622931256526215 ) 3 ( 4.553337336934305 3.602425324430186 4.553337336934305 r'hU ) 3 ( - + wtv + 5.76 + 0.60 0.4992700500199589 2.861345278181375 2.861345278181346 4.963401361061983 4.553337336934305 ) 4 ( ,Him + wtv - Hggm 4.553337336934305 Arch. Giuseppe Conte Arch. Giuseppe Conte - + wtv 4.553337336934305 DATE. DRAWING No: JOB No: SCALE 1 50 lulhvD REVISIONS. ) 3 ( R E V I S I O N S ,Him ) 3 . 4 ( - r'hU ) 3 ( ls___________] , lsj,wT CLIENT: lg; Hgsd] \ TITLE: (AUTOCAD) ARCHITECT: PROJECT: lav,U Hkah DESIGN HEAD: CHECKED BY: B DRAFT (1) DATE A REV. C D + 0.60 ,Him Arch. Giuseppe Conte Arch. Giuseppe Conte 4.553337336934305 0.1492749001758966 REVISIONS. SCALE lulhvD 1 50 ) 1 ( 4.930743361662053 + 4.93 2.199999999999989 3.402027350087394 4.963401361061983 4.963401361061983 4.963401361061983 4.130743360184852 5 8.113964911878838 + wtv Arch. Giuseppe Conte Arch. Giuseppe Conte 0.8000000000000114 r'hU ) 1 ( + 0.60 + 0.60 - Arch. Giuseppe Conte r'hU ) 2 ( + 5.76 + 5.76 + 5.76 + 5.76 5 10.12190564308554 4.553337336934305 5 6.622931256526215 10.12190564308554 + 4.00 - + wtv + 0.60 ) 2 ( ,Him 5 4.553337336934305 + 4.00 Arch. Giuseppe Conte Arch. Giuseppe Conte 4.553337336934305 3.402027350087565 lg; Hgsd] \ ,Him ) 1 . 2 ( - r'hU ) 1 . 2 ( ls___________] , lsj,wT Arch. Giuseppe Conte lav,U Hkah PROJECT: ARCHITECT: (AUTOCAD) CHECKED BY: DESIGN HEAD: TITLE: JOB No: DRAWING No: DATE. ) 2 ( D C 5 REV. CLIENT: A DATE DRAFT (1) R E V I S I O N S B 6.622931256526215 + 0.60 + wtv - ,Him Arch. Giuseppe Conte Arch. Giuseppe Conte 4.553337336934305 1.600000000000023 F 1.600000000000023 F yvtm H'fh 1.600000000000023 F F 1.600000000000023 10.79999999999995 10.79999999999995 10.79999999999995 10.79999999999995 Hg,Him Hgvzdsdm 0.90 2.2 F5 0.90 2.2 F4 fhF oaF :fS lv,pm fhF oaF pa,HJ CHECKED BY: (AUTOCAD) ARCHITECT: 1 50 1 200 dvHuD lvHum HgtjphJ lK Hg'fdum ) 4 ( lulhvD DRAWING No: DATE. SCALE JOB No: REVISIONS. DESIGN HEAD: 1 50 + wtv 3.0 7.999999999999943 r'hU ) 1 - 1 ( 1 50 5 - + wtv 0.6000000000000796 2.999999999999886 5 5 C 7.999999999999943 0.8999999999999204 ,H____im 1 50 Hggm - 0.80 0.80 1.00 3.65 2.65 A3 A4 4 u]] qgtm lavfdm ,>h[ ,sg; qgtm 2 u]] lavfdm ,>h[ Hkgd>D ,sg; ) lp,vD ( qgtm u]] 1.40 0.70 0.70 B A 1.20 A 13 1.30 F2 F1 2.2 1.60 2.20 0.80 1.00 A 12 1.30 1.30 1.20 A 11 1.85 1.75 2.65 0.40 0.57 1.30 5.88 0.47 1.35 1.00 A 10 A9 A6 A7 A8 >h[ ehfJ _ pgR oaF qgtm u]] 2 oaF s,d] fpgdhJkphS fhF oaF :fS lavfdm ,>h[ ,sg; qgtm u]] 2 2 u]] qgtm lavfdm ,>h[ ,sg; lavfdm ,>h[ Hkgd>D ,sg; ) lp,vD ( u]] 2 qgtm ) gglz`km ( lavfdm ehfjm lavfdm ,>h[ ,sg; qgtm lavfdm ehfjm lavfdm ehfjm 0.90 0.90 0.90 2.2 0.90 0.90 8.90 1.20 2.2 F3 0.75 fhF oaF :fS fk/hvI DATE lg; Hgsd] \ lav,U Hkah CLIENT: DRAFT (1) REV. TITLE: PROJECT: ls___________] , lsj,wT R E V I S I O N S 1.00 A5 lavfdm ,>h[ ,sg; 3 uvQ HBfuh] ',G Hgvl> 0.80 1.00 A2 1.75 1.00 A1 Hgl,wthJ qgtm u]] lavfdm ,>h[ Hkgd>D ,sg; ) lp,vD ( qgtm 2 u]] lavfdm ,>h[ ,sg; 2 1.20 1.40 gsm D udh]I 1.886107011077854 3.199999999999989 S > A11 A11 Hg],v HB,G _ Hglsj,wT 3.199999999999818 3.199999999999818 1 3 4 3.199999999999818 6 9.599999999999909 S 1.313892988922134 3.199999999999989 1.199999999999989 ] v F2 H,tdS u A12 A12 A12 A12 A3 F5 F5 F5 F2 F2 ],vHJ ] udh]I udh]I v 3.199999999999989 F5 F2 1.199999999999989 1.886107011077854 udh]I 3.199999999999989 A12 F1 > A11 A11 1 50 Hg],v HBvqD _ Hglsj,wT S 1.600000000000136 1.599999999999909 3.199999999999818 1.599999999999909 1.600000000000136 9.599999999999909 S 6 4 3 1 1.313892988922134 Hgl,rU HguhL 1 200 udh]I Hgl]dv A12 A12 A12 A12 A12 F5 F5 F5 F5 F2 F2 ] ] udh]I udh]I ],vHJ v v 3.199999999999989 3.199999999999989 F5 F2 1.199999999999989 1.199999999999989 1.599999999999966 H A12 A3 A3 A3 Hgrfgm plhL 1 2 3 4 H 3.199999999999818 1.599999999999909 1.600000000000136 1.599999999999966 6 5 1.600000000000136 1.599999999999909 9.599999999999909 A12 A3 A3 A3 F2 1.599999999999966 H 1.599999999999966 9.599999999999909 1.600000000000136 1.599999999999909 3.199999999999818 1.599999999999909 1.600000000000136 H 1 2 3 4 5 6 Hglsr' HBtrDggls] _ Hgl,rU HguhL 0.90 dvHuD lvHum HgtjphJ lK Hg'fdum Hglsr' HBtrDggls] 1 50 fhF oaF :fS oaF s,d] fpgdhJkphS 2 u]] qgtm >h[ ehfJ _ pgR oaF fk/hvI fhF oaF :fS fhF oaF pa,HJ lv,pm fhF oaF :fS 0.80 2.20 1.60 2.2 F1 F2 1.30 A 13 1.20 CHECKED BY: (AUTOCAD) ARCHITECT: 0.75 F4 2.2 0.90 F5 2.2 0.90 F3 2.2 1 2500 1 200 1 50 ) 1 ( DATE. SCALE DRAWING No: lulhvD JOB No: DESIGN HEAD: REVISIONS. gsm 1.20 8.90 0.90 0.90 2.2 0.70 0.70 1.40 1.40 1.20 0.90 0.90 2.5 A6 A5 2.5 18.0 18.0 S Q W ' A 2.375 21.89999999999986 0.9999999999997726 10 9 14 15 16 17 13 12 1 ,Him R2 2.375 0.4625000000000909 0.9999999999997726 2.000000000000227 4.0 2.375000000000227 u]] qgtm Hgl,wthJ u]] lavfdm ehfjm lavfdm ehfjm 3 u]] qgtm lavfdm ,>h[ ,sg; 2 lavfdm ,>h[ Hkgd>D ,sg; ) lp,vD ( u]] 2 qgtm lavfdm ,>h[ ,sg; qgtm u]] 4 qgtm lavfdm ,>h[ ,sg; lavfdm ehfjm ) gglz`km ( qgtm 2 u]] lavfdm ,>h[ Hkgd>D ,sg; ) lp,vD ( lavfdm ,>h[ ,sg; qgtm u]] 2 2 u]] qgtm lavfdm ,>h[ ,sg; qgtm lavfdm ,>h[ Hkgd>D ,sg; ) lp,vD ( 7 6 5 4 3 2 1 2 lavfdm ,>h[ ,sg; 0.4625000000000909 0.8000000000001819 1.099999999999682 0.9999999999997726 1.0 1.950000000000045 F1 5 A10 A2 A2 A1 F4 F4 F3 F3 F1 F1 1.0 1.5 ],vHJ ldq___________________m vhG A2 F3 2.0 F2 S A8 A7 A7 A1 F5 ' W A 5 R3 1.000000000000114 2.5 lo>K 0.9999999999998863 Hglh`km F 2 ,Him > v R1 H ] 2.5 2.5 4.00 A6 A5 A6 F1 wpK Hgls] 4.0 lwgD Hgsd]HJ A4 A4 ,Him 4 > v R1 4.0 lkfv Hgrfgm F1 A10 A2 A2 A1 F5 F3 F3 F1 F1 1.5 1.0 sd]HJ ldq___________________m ],vHJ 2.0 R3 A7 A7 A1 F5 F2 H 2.5 HlhL Hgls] ] plhL 2.0 C Hgvl> ',G HBfuh] uvQ A B A8 A7 A6 A5 A4 A3 A9 A 10 1.00 1.35 0.47 5.88 1.30 0.57 0.40 2.65 1.75 1.85 1.00 2.65 3.65 1.00 0.80 0.80 A 11 1.20 1.30 1.30 A 12 1.00 A2 1.00 0.80 R E V I S I O N S DRAFT (1) DATE CLIENT: REV. ls___________] , lsj,wT lg; Hgsd] \ TITLE: PROJECT: lav,U Hkah A1 1.00 1.75 1 2500 Hgl,rU HguhL Hgl]vsm Hgehk,D D Hglv:> HgwpD s\U+062Ak\U+0647 jhvD H]HvD lv:> jhvD Hgls] 1 200 Hgl,rU HguhL 2.025000000000091 21.89999999999986 ,Him 3 8 R2 17 16 15 14 13 11 2.025000000000318 Hgrfgm 0.9999999999997726 4.0 2.000000000000227 0.9999999999997726 4.0 6 5 4 3 2 1 1.950000000000045 1.0 0.9999999999997726 1.099999999999682 0.8000000000001819 Hgrfgm 5 5 5 HulhG HgkhvI ggls] ,Hglsj,wT 5 5 5 5 0.50 5 5 Hgvl> HgfdHK ltjhPltv] uh]D 10 - 15 Hlfdv ltjhP l>,[ uh]D 10 - 15 Hlfdv fvd>M uh]dm 127 t,gJ fvd>M jgt>d,K ltjhP lv,pm srT fvd>M jgt,K v T ltjhP l>,[ gg]v[ g,pm j,>dU tvudm g,pm j,>dU vzdsdm g,F lefJ fHgsrT 100 ,HJ g,F lvfU lefJ fHgsrT 100 ,HJ ktm lugrm fHgsrT 250 ,HJ lv,pm at' fhgl'hfO , HgplhlhJ glfm tg,vshkJ :fdvM l>,[ lv,pm l:dT glfm tg,vshkJ ltv] sohK lv,pm srT fvd>M sohK 20 Hlfdv A C C A C A lvphQ HtvkD fd]dm fhkd, p,Q ysdG Hd]D ltv] p,Q ysdG Hd]D l>,[ HgfdHK Hgvl> l]H] fbsjd; 2 f,wm l]H] fbsjd; 6 f,wm l]H] fbsjd; 3 f,wm l]H] fbsjd; 4 f,wm yvtm jtjdA 60*60 *60 uhl,] ji,dm 2 f,wm fbsjd; hgjvHF 30 * 30 sdt,K HvqD wthdm 3 f,wm fhkd, r]L uhl,] wvT 3 f,wm fbsjd; uhl,] ulG 4 f,wm fbsjd; lvphQ uvfD C A C A C A U J 2 U J 2 U J 2 U U 4 U U 4 U U 4 hgD fdhvM hgwvT 5 5 5 5 5 5 5 5 5 5 5 ) lrdHS hgvsL 1 100 ( ) lrdHS hgvsL 1 100 ( 1 - j,o` l,htrM hglhg: ugn udkM lK hbf,hF ,hgafhfd: rfG hgjv;dF 2 - j,o` [ldU lrhshJ hgtjphJ lK ugn hg'fduM hglhg: psF vyfI hgfdhK F 2 lbp/hJ F 4 A 3 A 2 A 1 F 3 F 1 kl,~ 1.00 1.00 hg[gsI 2.2 2.2 1.20 0.60 1.2 1.2 2.2 1.20 2.2 hvjthU hfuh] 1.00 0.60 0.80 uvQ hvjthU 0.60 0.60 1.40 5 5 5 5 5 5 5 5 5 5 A1 5 5 5 5 5 A2 A2 A2 5 5 A1 A1 A1 A1 A1 A1 lulHvn hg],v hb@vqD ) lrdHS hgvsL 1 100 ( 4 - hgl;jF ydv lsz,G uK hn jyddv h, ju]dG djl f],K lvh[uM hgl;jF 3 - jvh[U [ldU hbfuh] ,hglph,v lU [ldU hgg,hphJ hglulhvdM ,hbkahzdM hbovn 5 5 \A1;0.15 \A1;0.30 \A1;0.30 \A1;0.30 \A1;0.30 \A1;0.15 3 14 dqhT 2 12 p]d] ,s' tvA 3 14 lbp/hJ 2 14 ;,hfdG y'hx 2 14 u]G u]G kl,~ 1 wllj hbsshJ gjjplG ],v ,hp] tr' jvh[U hbfuh] ,hglph,v lK hgg,phJ hglulhvdI d[F u>G hbshshJ u>b [d]h fhgfdj,ldK hgshoK ulR 60 sL 60 sL 60 sL 70 sL ulR hgptv b drG uK 1.5 ljv h, hg,w,G gjvfm hgwhgpI gjplG 2.00 ;[l sl hbslkJ hglsjo]l ggr,hu] ,hgld]hJ ,vrhF hbul]M lK hgj,U hglrh,l gg;fvdjhJ ksfM hgog'M hgovshkdM hguh]dM 0.4 >g' + 0.8 vlG + 250 ;[l hslkJ l ugn hglrh,G , hglhg: ulG [shJ ggjvfM ggjh;] lK hg[i]hgjwldln ggjvfM ksfM hgog'M hgovshkdM hglsgpM 0.8 l >g' + 0.4 l vlG + 250 ;[l hslkJ l 3 14 3 14 3 16 3 16 l;sP l;sP 2 14 3 14 2 14 2 16 2 16 3 16 3 16 L 6 8 L L L 6 8 6 8 6 8 2 3 3 1 L uvQ 20 sL L 2 L 3 20 sL 20 sL L 4 20 sL 2 lbp/hJ 3 6 4 5 3 7 8 [],G klh~ hbul]M 140 sL [],G klh~ hgld]hJ ovshkM uh]dM [],G klh~ hgr,hu] 170 sL jsgdP stgn hg],v hb,G dkt~ pjD lks,F srT hglpvhF 170 sL 120 sL 60 sL jsgdP ug,n ;hkhJ jsgdP r'hU hg],v hgehkn jsgdP ',G ovshkM lsgpM uvQ hvjthU 60 sL 150 sL 150 sL 20 sL r'hU hvjthU 20 sL 10 14 ;hkhJ lbp/hJ L L lbp/hJ jsgdP tvA y'hx L 12 14 12 14 14 14 6 8 6 8 6 8 R 190 sL 2 r'hU hg],v hbvqn U 1 U 2 kl,~ r'hU 10 16 8 16 jsgdP 40 40 sl 20 60 sl kl,~ ',G 1 R uvQ 20 20 sl 3 U 4 16 R 3 170 sL ;[l sl fu] 28 d,l ll fhbv;hK fhgfb'hJ hgjn d>d] ls'pih uK 4 4 l jvh[U [ldU hbfuh] ,hglph,v lU [ldU hgg,hphJ hglulhvdM ,hbkahzdM hbovn 12 - hg[>x hglwll i,v]n dsjo]l tdI ',F hplv otdT lrhS 40 9 - d;sP p]d] hgfb'M flr]hv hgolS ,dlj] hgn vfU hgfpv hgl[h,v 8 - juhg hgovshkM fhgvA fhglhx lvjdK d,ldH ,gl]M hsf,U lK hgwF 11 - sl: fb'M hgsgl 15 sl lh gl d~;v obT ~g: ugn hgvsl 10 - dlj] p]d] hg;,hfdG , hgfg;,khJ lvM ,kwT ',G hgfv,> ksfM hgog'M hgovshkdM hglsgpM 0.8 l >g' + 0.4 l vlG + 250 ;[l hslkJ l 5 - hga]M hgoafdM gbsrT b jt: rfG lqn 21 d,l ugn hbrG lK jhvdO hgwF 4 - hgfb'hJ hglwljM sl: 15 sl lh gl d~;v obT ~g: ugn hgvsl ,d[F hK drG 15 sl h[ih] hg;sv ggovshkI hglsgpI b drG uK 350 7 - dvhun ysdG hg>g' fhglhx rfG hgwF b>hgM hga,hzF 6 - d[F hK djv: [>x lwlJ 20 sl gjsgdP 12 * 20 20 * ug,n ,stgn f[,hv hg;lvhJ hgshr'M ,hbuwhF hg;hf,gdM uK fhrn hgsrT sl ,j,qU hubM wfI fsl: 10 sl 2 - lbp/hJ ,jsgdP 10 13 - 5 14 - j,qU t,hjdv 16 - - 15 3 3 - hgp]d] hglsjo]l i, hgwgF ~, hgkj,hJ 1 - hgsrT lK hgk,U hguh]n 6 ll l tn hbj[hidK jsgdP stgn 2 16 3 16 2 14 4 14 jsgdP 2 14 3 16 2 14 2 16 ug,n L L L L L 6 8 6 8 6 8 6 8 6 8 ;hkhJ l;sP ;lvM l]t,kM lbp/hJ dqhT 2 12 p]d] ,s' ;l 1 50 sL hgkl,~ : 2 : 1 : 4 : 3 20 sL 20 sL 20 sL hguvQ 20 sL 15 sL 5 16 3 14 3 14 u]G 3 16 3 16 60 sL 60 sL 60 sL hgulR 70 sL hgr'hU [],G klh~ hg;lvhJ ,h[iM [k,fdM L 2 U 1 1 R 1 U R 1 1 U R 1 1 U R 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 U R 1 1 R 2 U 2 2 U R 2 3 U 3 R 3 U 3 R U 3 3 R 2 L 2 L 2 L 2 L 2 L 2 L 2 L 2 L 3 L 1 L 1 L L 1 L 1 L 1 3 L L 4 L 2 2 L 3 L 2 L 4 6 5 3 1 2 7 4 7 6 5 3 2 1 F ] X 5 5 5 5 X F ] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 L 2 2 L L 6 10 L 5 10 L 5 10 6 10 L L 5 10 6 10 L 1 100 lrdhS hgvsL srT hg],v hbvqD L 6 12 5 12 L 6 12 L 5 12 L 6 12 L 5 12 L L 6 12 L 5 12 7 14 L L 6 12 6 12 L 7 14 L 5 12 L 7 10 L 6 12 L L 5 12 ;l 2 ;l 2 ;l 1 ;l 1 ;lvM l]t,kM 70 sL 15 sL ;l 2 L 6 8 4 14 8 16 4 5 5 5 6 7 5 5 5 5 5 5 1 2 3 5 5 5 ] F X 5 5 5 5 5 5 4 5 5 7 6 5 5 5 5 5 5 5 3 2 1 5 5 5 X F ] 5 5 5 5 5 5 ,h[iM yvfdM : 2 : 3 : 2 : 2 : 2 : 2 : 2 : 2 : 2 : 2 : 3 : 4 : 2 : 2 : 2 : 2 : 2 : 2 : 2 : 2 : 4 : 4 : 4 : 4 S S S S L 2 4 L 4 L 2 L 2 L 3 L 20 sL 60 sL 3 14 2 14 80 sL 7 14 7 14 80 sL 100 sL 100 sL 1 L L 1 / / / / / / / / PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: On PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off Use the Plot-RCP layout tab to plot a reflected ceiling plan. Use the Work-RCP layout tab to work on ceiling objects. Use the Work-3D layout tab to work on everything in the building model except ceiling objects. Use the Plot-SEC layout tab to plot sections and elevations. Use the Work-FLR layout tab to work on everything in the building model except ceiling objects. \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Plot DISPLAY SET: Plot_Section ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: Yes \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Plot DISPLAY SET: Plot_Section ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: Yes RIGHT Plot-SEC FRONT PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: On \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Plan ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No PLAN Work-FLR PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off Model \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Plot_Reflected DISPLAY SET: Plot_Reflected ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: Yes TITLEBLOCK: AEC_Border (w/attributes) PLOT SCALE: 1:1 PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape Plot-RCP PLAN PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape TITLEBLOCK: None PLOT SCALE: 1:1 PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape TITLEBLOCK: None PLOT SCALE: Fit PLAN Work-RCP \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work_Reflected DISPLAY SET: Reflected ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No Work-3D SW ISOMETRIC \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Model ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No Work-SEC Use the Work-SEC layout tab to work on Sections and Elevations. Space Use the Space layout tab to work on Spaces and Space Boundaries. PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape TITLEBLOCK: AEC_Border (w/attributes) PLOT SCALE: 1:1 PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape TITLEBLOCK: None PLOT SCALE: 1:1 TITLEBLOCK: None PLOT SCALE: 1:1 PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off TITLEBLOCK: None PLOT SCALE: 1:1 \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Section ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No FRONT TITLEBLOCK: None PLOT SCALE: 1:1 \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Section ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No RIGHT AEC Arch (Imperial - Intl) Template autodesk Architectural Desktop 3 PLAN DISPLAY CONFIGURATION: Work DISPLAY SET: Work_Plan ZOOM SCALE: All PLAN \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Plan ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No SW ISOMETRIC \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Concept_Space DISPLAY SET: Spaces_Model ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No PERSPECTIVE SW ISOMETRIC \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Model ZOOM SCALE: N/A DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Work DISPLAY SET: Work_Model ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Concept_Space DISPLAY SET: Spaces_Plan ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No PLAN To delete this layout, right click on the layout tab and click on delete. TITLEBLOCK: AEC_Border (w/attributes) PLOT SCALE: 1:1 TITLEBLOCK: None PLOT SCALE: 1:1 PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: Off PAGE SETUP PLOTTER CONFIGURATION: DWF ePlot PLOT STYLE TABLE: AIA(256) Scale 96.ctb DISPLAY PLOT STYLES: On Use the Plot-FLR layout tab to plot a floor plan. Use the Work-3D layout tab to work on Mass Elements and Mass Groups. Plot-FLR PLAN \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Plot DISPLAY SET: Plot_Plan ZOOM SCALE: 1/96xp (1/8" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: Yes Mass-Group PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape PAPER SIZE: ARCH D (24.00 x 36.00 Inches) DRAWING UNITS: Inches ORIENTATION: Landscape ANNOTATION PLOTTING SIZE: 1/8" LAYER STANDARD: AIA (256 Color) Layer Guidelines DRAWING SETUP DRAWING UNITS: Inches DRAWING SCALE: 1/8" = 1'-0" \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Concept_Mass DISPLAY SET: Concept_Mass ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No SW ISOMETRIC SW ISOMETRIC \LVIEWPORT SETTINGS \lDISPLAY CONFIGURATION: Concept_Group DISPLAY SET: Concept_Group ZOOM SCALE: 1/192xp (1/16" = 1'-0") DISPLAY VIEWPORT OBJECTS: Yes HIDE PLOT: No DISPLAY LOCKED: No autodesk\H0.25x;® Architectural Desktop 1 A B 2 3 C D 4 5 A B C D 1 2 3 4 5 A0.0 DRAWN BY: CHECKED BY: PROJECT NUMBER: ISSUED: FILENAME: PROJECT NAME - - FLOOR PLANS 0000000 00.00.00 --- --- .DWG A0.0 PROJECT NAME - - SECTIONS & ELEVATIONS 0000000 00.00.00 --- --- .DWG A0.0 PROJECT NAME - - CEILING PLANS 0000000 00.00.00 --- --- .DWG A0.0 PROJECT NAME - - FLOOR PLANS 0000000 00.00.00 --- --- .DWG ROOM 000 ROOM 100 x STANDARD 000 L W STANDARD 000 L W \A1;142'-6" \A1;14' \A1;85'-7" \A1;1092'-2\S3/8;" \A1;41'-1" \A1;24'-10" \A1;24'-11" W S SE NE SW NW N E SECTION THRO PORTICO AND ROTUNDA PLAN 142'-6" 14' 85'-7" 5 4'-0" THICK EYE (UNGLAZED) 41'-1" 24'-10" 24'-11" A B BONZE MOULDING TO EYE OF DOME THE PANTHEON ROME CAD T.V.B.S.H.S. II YR. IV SEM. ABHAY PANDEY ROL. 0041731603 SCALE-1:250 28,28 40,22 5,85 2,32 13,82 10,42 31,2 75,18 8,7 CORTE LONGITUDINAL 5 5 5 5 5 5 5 5 5 ELEVACIÓN LATERAL PLANTA ELEVACIÓN FRONTAL (SIN CÚPULA) I-PLST-CAST-1 I-PLST-CAST-3 I-PLST-CAST-4 I-PLST-CAST-2 I-PLST-CAST-2a PLASTER CAST TYPES I-PLST-SCONCE I-PLST-CAST-5 I-PLST-CAST-6 I-PLST-CAST-7

Language	N/A
Drawing Type	Block
Category	Historic Buildings
Additional Screenshots
File Type	dwg
Materials	Moulding, Other, N/A
Measurement Units
Footprint Area
Building Features	Elevator, Parking, Garden / Park
Tags	autocad, block, chinese, church, corintio, culture, dom, dorico, DWG, église, facade, features, geschichte, igreja, jonico, kathedrale, kirche, kirk, l'histoire, la cathédrale, main, palace, teat, Theater, theatre