Diffuser With Sheetrock DWG Detail for AutoCAD
Plano Construction Details for fastening drywall panels; details; materials; specifications; installation procedure .
Drawing labels, details, and other text information extracted from the CAD file (Translated from Spanish):
the walls of the drywall are built with the base of faces of the profile on which they are screwed, the plaster panels have a knurling to prevent the screw from slipping and penetrating properly., the posts are rigid elements that do not support, load and They come perforated to allow the passage of, facilities. the poles and mooring channels are, these elements form a frame, which is, wide composed of a core of gypsum, incombustible pressed between two sheets of paper, resistant. Manila finished panel is folded, around the longitudinal edges to reinforce, use a ruler as a guide and pass a razor, drywall, support system, thickness, aluminum angle, material finish, ceramic glaze brand, sta. julia or similar, for drywall, cement-sand mortar, cadminized screw, ceramic adhesive, cement mortar flattening, common red partition wall, specifications notes, with cornet head, drywall, execution :, make the outline of the frame according to the plan of the project, pass levels of ceiling in all existing vertical elements, such as columns and walls, the pendants should be started and finished one, tructural., the gutters will be attached to the pendants , the lath channel will be tied to the gutter with the, the frame will be stiffened with fitters, control joints must be left in the following cases: – in constructive joints, in union with structural elements, in surfaces with lengths , they form in plan by the geometry of the building., plaster plates will be fixed to the metal slats, screw will not penetrate the gypsum core, will break the cardboard, the panel will be finished with bead molding. for Exit of facilities must be forced, the control joints are sealed, applying one, this is placed the reinforcing tape to cover, screws and resanes., tolerances :, the maximum tolerable difference in horizontal panels, no protuberances will be admitted , no major depressions, gularidades, fissures or despostilladuras., false flattening plafon of mix., beam of concrete, beam of wood, beam of steel, mixing with joints, center to center in, both directions, metal deployed, moored with wire, channeling channels, channel, flush, and crossover, system, suspension, moored and, fixed to the structure, above, wire suspension, gutter, main, suspension system moored, as required, procedure of execution :, the resistance of the ceiling will be preempted as a function of the loads to be supported and it will be checked that they are placed, in the case of a metal structure between-, in all cases, if there are built-in luminaires, fi jaran to the ceiling, metal frames to embed in them, the units, vanized, under which the expanded metal is spread, for the mortar of mixing, portland cement, normal, brand Anahuac or similar, hydrated lime, , blue mine sand, clean, and the final finish will be, according to what the project indicates :, to the smallest dimension saved., hanging wire attached to the armed, may be :, – tirol, – others, – painting, drywall, hanging, wire, various sizes, channel, channels, laminates, cold, moorings, flush, for lathing, metal, round rod, forming cornice, channels, pendant, mooring, details of spacer , bending, the suspended false ceilings of metal structure, and drywall coverings are used for the purpose of hiding all types of facilities that run under, the lower bed of the deck slabs, in addition to, the most commonly used materials are: , calcium sulfate rock plate calcined, improved, with additive, manufactured and laminated in various sizes and, thicknesses, covered with manila cartonboard in its two, faces, used in the construction also for walls, partitions., dimensions :, delivery, storage and handling :, a. – deliver the materials in the containers without, open, originals of the manufacturer, carrying registered trademark and identification of the manufacturer or distributor., b.- store the materials inside the building to protect them against damage, water and excessive humidity, – Bring the drywall with heavy polyethylene linings, do not bend or damage the poles, gutters and metallics., c.- The plates should be in a dry place and protected against moisture, storage. it must allow the ventilation to avoid the deterioration and deformation of the plates, tones, channels of galvanization and galvanized wire of the d.- form the metal frame with the gutters, lis-, architect., canal main, secondary channel, channel it is main, or secondary, double tie-down with, laminated channel, welding, rod, clamp, sheet metal, metal, notched, talica or concrete slab, by using clav- ies for concrete, taquet
Raw text data extracted from CAD file:
| Language | Spanish |
| Drawing Type | Detail |
| Category | Construction Details & Systems |
| Additional Screenshots |
 |
| File Type | dwg |
| Materials | Aluminum, Concrete, Plastic, Steel, Wood, Other |
| Measurement Units | Metric |
| Footprint Area | |
| Building Features | Deck / Patio |
| Tags | aluminio, aluminium, aluminum, autocad, ceiling, ceilings, construction, DETAIL, details, diffuser, drywall, DWG, fastening, gesso, gips, glas, glass, installation, l'aluminium, le verre, materials, mauer, mur, panels, parede, partition wall, plano, plaster, plâtre, sheetrock, specifications, vidro |