Losacero DWG Detail for AutoCAD

Losacero DWG Detail for AutoCAD

detailed drawing Losacero

Drawing labels, details, and other text information extracted from the CAD file (Translated from Spanish):

table of characteristics of mixed slabs, losacero imsa, cant: mm, intereje: mm, width panel: mm, upper width: mm, bottom width: mm, lateral overlap type: bottom, elastic limit:, profile: mm, surface weight:, useful section:, moment of inertia:, resistant module:, all slabs, the ground cm, supports, all slabs, maximum distance between supports:, note the sheets must be attached to the support profile, screws that prevent their movement in, execution phase. check delivery details, overlap of the lamina on the as well as the, special edge., note see the type of lateral overlap between, positions for the mixed slabs of, according to the manufacturer’s catalog., first second level roof, lower longitudinal reinforcement, concrete:, rolled steel: astm ksi, steels in slabs: fy, see construction details, corresponding, joining of metal beams with slabs, scale:, fixing the harness, angle, lock metal, finished floor, cap welding, welded Mesh, losacero galvadeck, detail, losacero system, on beams, max. m., mesh, compression layer, the section section, joists go, ipr metal, floor system section, concrete, concrete f’c, floor system, sheet, connectors, see table of, sheet, vars a.d., supporting profile for foil, cutting, connector, self-weldable, with bow, instant, electric, specification, connectors on rails two, in each valley, connector table, vp one in each valley, connectors in reinforcement beams, one each cm.

Raw text data extracted from CAD file:

\A1;113.5mm \A1;50mm \A1;10.63 \A1;1.9 \A1;30 \A1;30 \A1;30 \A1;30 Tabla de características de losas mixtas (Grupo 2) LOSACERO IMSA IMSA-22 Peralte: 65 mm Intereje: 305 mm Ancho panel: 915 mm Ancho superior: 125 mm Ancho inferior: 125 mm Tipo de traslape lateral: Inferior Límite elástico: 2446.48 kg/cm2 Perfil: 0.80 mm Peso superficial: 8.25 kg/m2 Sección útil: 10.51 cm2/m Momento de inercia: 62.63 cm4/m Módulo resistente: 18.71 cm3/m 125 125 305 65 120 Todas las losas LOSACERO IMSA, 0.80mm, 12.0 cm Soportes Todas las losas Distancia máxima entre soportes: 2.25 m Nota 1: Las láminas deben fijarse al perfil de apoyo mediante tornillos o fijaciones que eviten su movimiento en fase de ejecución. Consulte los detalles de entrega y traslape de la lamina sobre los apoyos, así como las piezas especiales de borde. Nota 2: Consulte el tipo de traslape lateral entre paneles, posición y resaltes para las losas mixtas colaborantes, de acuerdo al catálogo del fabricante. PRIMER NIVEL, SEGUNDO NIVEL Y AZOTEA Armado longitudinal inferior Concreto: f'c=250 Acero laminado y armado: ASTM A 572 50 ksi Aceros en losas: fy = 4200 Consulte los detalles constructivos correspondientes a la unión de las vigas metálicas con losas Escala: 1:50 d=2cm @ 300 6 Fijacion de losacero Angulo 2x1/4'' Trabe metalica piso terminado soldadura de tapon malla electrosoldada 113.5mm 50mm losacero galvadeck 25 cal.22 DETALLE 4 a/c 45cm SISTEMA LOSACERO SOBRE VIGAS Max. 2.50 m. Max. 2.50 m. MALLA 6x6/10-10 CAPA DE COMPRESION ( 5 cms.) LOSACERO SECCION 4 VIGUETAS IR METALICAS IPR 13.0 6.65 SECCIÓN DEL SISTEMA DE PISO 6.35 L O S A C E R O 2.5 CONCRETO Ec = 220 000 Kg/cm² CONCRETO f'c = 250 Kg/cm² SISTEMA DE PISO LÁMINA CONECTORES VER TABLA DE LÁMINA IMSA.- SECC.-4 CAL.-22 VARS. #3@20 a.d. PERFIL DE APOYO PARA LÁMINA 10.63 CORTANTE CONECTOR DE AUTOSOLDABLE CON ARCO d=3/4"x4 3/16" INSTANTÁNEO ELÉCTRICO ESPECIFICACIÓN 1.9 CONECTORES EN LARGUEROS (L) DOS EN CADA VALLE TABLA DE CONECTORES 30 30 VP ó V UNO EN CADA VALLE CONECTORES EN ARMADURAS (A), VIGAS 30 30 \A1;C.S. \A1;C.S. o Ó UNO A CADA 30 cm. \A1;PATIN

Language	Spanish
Drawing Type	Detail
Category	Construction Details & Systems
Additional Screenshots
File Type	dwg
Materials	Concrete, Steel
Measurement Units
Footprint Area
Building Features	A/C, Deck / Patio
Tags	adobe, autocad, bausystem, construction system, covintec, DETAIL, detailed, drawing, DWG, earth lightened, erde beleuchtet, losacero, plywood, sperrholz, stahlrahmen, steel framing, structures, système de construction, terre s